Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) vs VALMET 505/505-4

10 material differences · fewer than 12

Tractor one

1988–2000

No measured PTO figure

Tractor two

1983–1989

No measured PTO figure

Which should you choose?

Read our verdict on the R-7860 (DT) TL-20 N/M (TL-20 DT/M) and the 505/505-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M) and VALMET 505/505-4, field by field
Field	R-7860 (DT) TL-20 N/M (TL-20 DT/M)	505/505-4	Gap
Engine
Engine power, claimed claimed	70.0 hp	64.1 hp	+9% R-7860 (DT) TL-20 N/M (TL-20 DT/M)
Engine declared	Perkins LD 4.236	VALMET TD 33 DS 5	differs
Displacement declared	3.87 L	3.30 L	+17% R-7860 (DT) TL-20 N/M (TL-20 DT/M)
Maximum torque declared	195 lb·ft · 264 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Dry and air-cooled OMG double clutch	Pedal-operated dry LuK single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	9.8 gpm · 37.2 L/min	—	—
Pressure declared	2,756 psi · 190 bar	2,901 psi · 200 bar	+5% 505/505-4
Three-point lift at ends declared	4,698 lb · 2,131 kg	8,699 lb · 3,946 kg	+85% 505/505-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,305 lb · 2,860 kg	7,760 lb · 3,520 kg	+23% 505/505-4
Wheelbase declared	89.8 in · 2,281 mm	93.2 in · 2,368 mm	—
Length declared	146.1 in · 3,710 mm	172.8 in · 4,390 mm	+18% 505/505-4
Width declared	78.3 in · 1,990 mm	77.2 in · 1,960 mm	—
Height declared	94.3 in · 2,395 mm	105.1 in · 2,670 mm	+11% 505/505-4
Ground clearance declared	20.3 in · 515 mm	18.3 in · 465 mm	+11% R-7860 (DT) TL-20 N/M (TL-20 DT/M)
Turning radius, braked declared	13.0 ft · 3.96 m	—	—
Fuel tank declared	90.9 qt · 86.0 L	190.2 qt · 180.0 L	+109% 505/505-4

Source

Source