Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) vs SAME Centurion 75 (DT)

9 material differences · fewer than 12

Tractor one

1983–1987

No measured PTO figure

Tractor two

1978–1985

No measured PTO figure

Which should you choose?

Read our verdict on the 7830 (DT) TL-20 N/F (TL-20 DT/F) and the Centurion 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Landini 7830 (DT) TL-20 N/F (TL-20 DT/F) and SAME Centurion 75 (DT), field by field
Field	7830 (DT) TL-20 N/F (TL-20 DT/F)	Centurion 75 (DT)	Gap
Engine
Engine power, claimed claimed	71 hp	72.0 hp	—
Engine declared	Perkins A 4.236	SAME DA 1054 P	differs
Displacement declared	3.87 L	4.15 L	+7% Centurion 75 (DT)
Maximum torque declared	202 lb·ft · 274 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Hydraulics & hitch
Pump flow declared	10.2 gpm · 38.7 L/min	5.8 gpm · 22.0 L/min	+76% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Pressure declared	—	2,973 psi · 205 bar	—
Three-point lift at ends declared	6,724 lb · 3,050 kg	5,952 lb · 2,700 kg	+13% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,986 lb · 2,715 kg	7,209 lb · 3,270 kg	+20% Centurion 75 (DT)
Wheelbase declared	87.0 in · 2,210 mm	91.3 in · 2,320 mm	—
Length declared	147.6 in · 3,750 mm	151.2 in · 3,840 mm	—
Width declared	78.7 in · 1,999 mm	76.0 in · 1,930 mm	—
Height declared	94.4 in · 2,399 mm	109.4 in · 2,780 mm	+16% Centurion 75 (DT)
Ground clearance declared	21.1 in · 535 mm	20.9 in · 530 mm	—
Turning radius, braked declared	12.8 ft · 3.89 m	11.5 ft · 3.50 m	+11% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Fuel tank declared	63.9 qt · 60.5 L	126.8 qt · 120.0 L	+98% Centurion 75 (DT)

Source

Source