Landini 5860 (DT) TL-22 N/K (TL-22 DT/K) vs URSUS C-360 3P

8 material differences · fewer than 12

Tractor one

1988–2000

No measured PTO figure

Tractor two

1981–1993

No measured PTO figure

Which should you choose?

Read our verdict on the 5860 (DT) TL-22 N/K (TL-22 DT/K) and the C-360 3P → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

Landini 5860 (DT) TL-22 N/K (TL-22 DT/K) and URSUS C-360 3P, field by field
Field	5860 (DT) TL-22 N/K (TL-22 DT/K)	C-360 3P	Gap
Engine
Engine power, claimed claimed	46.4 hp	46.8 hp	—
Engine declared	Perkins AD 3.152 S	PERKINS AD 3.152 UR	differs
Displacement declared	2.50 L	2.50 L	—
Maximum torque declared	124 lb·ft · 168 N·m	122 lb·ft · 165 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Clutch declared	Dry and air-cooled LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	10.0 gpm · 37.9 L/min	5.7 gpm · 21.5 L/min	+76% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Pressure declared	2,756 psi · 190 bar	—	—
Three-point lift at ends declared	4,497 lb · 2,040 kg	2,646 lb · 1,200 kg	+70% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	4,960 lb · 2,250 kg	4,533 lb · 2,056 kg	+9% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Wheelbase declared	83.7 in · 2,126 mm	85.5 in · 2,172 mm	—
Length declared	139.4 in · 3,540 mm	142.1 in · 3,610 mm	—
Width declared	71.5 in · 1,815 mm	70.9 in · 1,800 mm	—
Height declared	89.8 in · 2,280 mm	80.7 in · 2,050 mm	+11% 5860 (DT) TL-22 N/K (TL-22 DT/K)
Ground clearance declared	17.1 in · 435 mm	17.3 in · 440 mm	—
Turning radius, braked declared	11.3 ft · 3.44 m	11.1 ft · 3.37 m	—
Fuel tank declared	90.9 qt · 86.0 L	71.9 qt · 68.0 L	+26% 5860 (DT) TL-22 N/K (TL-22 DT/K)

Source

Source