Landini 11800 (DT) or VALMET 1103/1103-4?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 11800 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1103/1103-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Landini 11800 (DT) suits loader and hydraulic implement work better on this data: 46% (16.2 L/min / 4.3 gpm) more hydraulic flow and 38% (1,247 kg / 2,749 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 11800 (DT) | 1103/1103-4 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 78.8 kW (105.7 hp)Traktorenlexikon, “Landini 11800 DT” | 78.7 kW (105.5 hp)Traktorenlexikon, “Valmet 1103” | Not comparableNot comparable on power at the PTO shaft: the 11800 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1103/1103-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 11800 (DT) and the 1103/1103-4. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 11800 (DT) and the 1103/1103-4. |
| Which pumps more oil for implements? | 51.2 L/min (13.5 gpm)Traktorenlexikon, “Landini 11800 DT” | 35.0 L/min (9.2 gpm)Traktorenlexikon, “Valmet 1103” | AheadThe Landini 11800 (DT) has 46% more hydraulic flow (16.2 L/min / 4.3 gpm) than the VALMET 1103/1103-4 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,497 kg (9,914 lb)Traktorenlexikon, “Landini 11800 DT” | 3,250 kg (7,165 lb)Traktorenlexikon, “Valmet 1103” | AheadThe Landini 11800 (DT) has 38% more lift (1,247 kg / 2,749 lb) than the VALMET 1103/1103-4 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 4,390 kg (9,678 lb)Traktorenlexikon, “Landini 11800 DT” | 3,950 kg (8,708 lb)Traktorenlexikon, “Valmet 1103” | Ahead (a fact, not an advantage)The Landini 11800 (DT) is 11% heavier (440 kg / 970 lb) than the VALMET 1103/1103-4 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,000 kg (15,432 lb)Traktorenlexikon, “Landini 11800 DT” | — | No figureNo call on maximum permissible mass: no figure on record for the 1103/1103-4. |
| Which has the wider choice of gears? | 32Traktorenlexikon, “Landini 11800 DT” | 16Traktorenlexikon, “Valmet 1103” | AheadThe Landini 11800 (DT) has 100% more forward gears (16 gears) than the VALMET 1103/1103-4 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 11800 (DT) and the 1103/1103-4. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Landini 11800 DT” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 1103” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Landini 11800 DT” | 540/1000 rpmTraktorenlexikon, “Valmet 1103” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 11800 (DT) and the 1103/1103-4. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Landini 11800 DT” | Two-wheel or four-wheel driveTraktorenlexikon, “Valmet 1103” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1987–2000 | 1979–1980 | Ahead (a fact, not an advantage)The Landini 11800 (DT) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Landini 11800 (DT) has 46% more hydraulic flow (16.2 L/min / 4.3 gpm) than the VALMET 1103/1103-4 (both pump flow, as stated by the source).
- The Landini 11800 (DT) has 38% more lift (1,247 kg / 2,749 lb) than the VALMET 1103/1103-4 (both lift at the hitch ends, as stated by the source).
- The Landini 11800 (DT) is 11% heavier (440 kg / 970 lb) than the VALMET 1103/1103-4 (both unladen weight, as stated by the source).
- The Landini 11800 (DT) has 100% more forward gears (16 gears) than the VALMET 1103/1103-4 (both forward gears, as stated by the source).
- The Landini 11800 (DT) is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 11800 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1103/1103-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources