Landini 10.000 (DT) vs Steyr 8120 (a)

11 material differences · fewer than 12

Tractor one

1978–1993

No measured PTO figure

Tractor two

1978–1984

No measured PTO figure

Which should you choose?

Read our verdict on the 10.000 (DT) and the 8120 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Landini 10.000 (DT) and Steyr 8120 (a), field by field
Field	10.000 (DT)	8120 (a)	Gap
Engine
Engine power, claimed claimed	98.6 hp	98.7 hp	—
Engine declared	Perkins TW 31087 U (A. 6.354.4/A. 6.354.4 HTR)	Steyr WD-611.85	differs
Displacement declared	5.79 L	5.18 L	+12% 10.000 (DT)
Maximum torque declared	289 lb·ft · 392 N·m	267 lb·ft · 362 N·m	+8% 10.000 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated, dry and air-cooled double clutch	Dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	12.3 gpm · 46.5 L/min	9.4 gpm · 35.5 L/min	+31% 10.000 (DT)
Pressure declared	—	3,553 psi · 245 bar	—
Three-point lift at ends declared	6,746 lb · 3,060 kg	8,957 lb · 4,063 kg	+33% 8120 (a)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,976 lb · 4,525 kg	8,477 lb · 3,845 kg	+18% 10.000 (DT)
Wheelbase declared	104.7 in · 2,660 mm	98.8 in · 2,509 mm	+6% 10.000 (DT)
Length declared	171.3 in · 4,350 mm	163.0 in · 4,140 mm	—
Width declared	83.9 in · 2,130 mm	84.3 in · 2,140 mm	—
Height declared	113.2 in · 2,875 mm	102.2 in · 2,595 mm	+11% 10.000 (DT)
Ground clearance declared	16.9 in · 430 mm	17.3 in · 440 mm	—
Turning radius, braked declared	—	13.8 ft · 4.20 m	—
Fuel tank declared	179.6 qt · 170.0 L	128.9 qt · 122.0 L	+39% 10.000 (DT)

Source

Source