8 material differences · fewer than 12
Tractor oneLandini 10.000 (DT)1978–1993No measured PTO figureTractor twoSAME Tiger SIX 1051977–1984No measured PTO figure
Which should you choose?
Read our verdict on the 10.000 (DT) and the Tiger SIX 105 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 10.000 (DT) | Tiger SIX 105 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.6 hp | — |
| Engine declared | Perkins TW 31087 U (A. 6.354.4/A. 6.354.4 HTR) | SAME DA 986 P or DA 1006 P | differs |
| Displacement declared | 5.79 L | — | — |
| Maximum torque declared | 289 lb·ft · 392 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal-operated, dry and air-cooled double clutch | Pedal operated dry Borg & Beck single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.3 gpm · 46.5 L/min | 7.9 gpm · 30.0 L/min | +55% 10.000 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,976 lb · 4,525 kg | 8,929 lb · 4,050 kg | +12% 10.000 (DT) |
| Wheelbase declared | 104.7 in · 2,660 mm | 104.7 in · 2,660 mm | — |
| Length declared | 171.3 in · 4,350 mm | 170.5 in · 4,330 mm | — |
| Width declared | 83.9 in · 2,130 mm | 87.4–103.1 in · 2,220–2,620 mm | differs |
| Ground clearance declared | 16.9 in · 430 mm | 18.7 in · 475 mm | +10% Tiger SIX 105 |
| Turning radius, braked declared | — | 12.8 ft · 3.90 m | — |
| Fuel tank declared | 179.6 qt · 170.0 L | 142.7 qt · 135.0 L | +26% 10.000 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 10.000 (DT) sources
- Source: Traktorenlexikon, “Landini 10000”
SAME Tiger SIX 105 sources
- Source: Traktorenlexikon, “SAME Tiger Six 105”