Lamborghini 1100 DT vs VALMET 8050

11 material differences · fewer than 12

Tractor one

2000–2003

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 1100 DT and the 8050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Lamborghini 1100 DT and VALMET 8050, field by field
Field	1100 DT	8050	Gap
Engine
Engine power, claimed claimed	108.5 hp	108.5 hp	—
Engine declared	SAME 1000.6 WT	VALMET 620 DSR or 620 DSRE	differs
Displacement declared	6.00 L	6.59 L	+10% 8050
Maximum torque declared	299 lb·ft · 405 N·m	340 lb·ft · 461 N·m	+14% 8050
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	Pedal-operated, hydraulic dry S.L.H. single-disc clutch	Pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	18.8 gpm · 71.0 L/min	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	13,669 lb · 6,200 kg	14,110 lb · 6,400 kg	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,861 lb · 5,380 kg	10,450 lb · 4,740 kg	+14% 1100 DT
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	108.3 in · 2,750 mm	100.7 in · 2,558 mm	+8% 1100 DT
Length declared	180.7 in · 4,590 mm	187.3 in · 4,757 mm	—
Width declared	88.6 in · 2,250 mm	84.8 in · 2,155 mm	—
Height declared	126.8 in · 3,220 mm	108.3 in · 2,750 mm	+17% 1100 DT
Ground clearance declared	15.7 in · 400 mm	18.7 in · 475 mm	+19% 8050
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	253.6 qt · 240.0 L	174.4 qt · 165.0 L	+45% 1100 DT

Source

Source