Lamborghini 1100 DT or VALMET 8050?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 1100 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8050 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 1100 DT | 8050 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 80.9 kW (108.5 hp)Traktorenlexikon, “Lamborghini Premium 1100 DT A” | 80.9 kW (108.5 hp)Traktorenlexikon, “Valmet Mega-8050” | Not comparableNot comparable on power at the PTO shaft: the 1100 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8050 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 1100 DT and the 8050. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 1100 DT and the 8050. |
| Which pumps more oil for implements? | — | 71.0 L/min (18.8 gpm)Traktorenlexikon, “Valmet Mega-8050” | No figureNo call on hydraulic flow: no figure on record for the 1100 DT. |
| Which lifts more on the three-point hitch? | 6,200 kg (13,669 lb)Traktorenlexikon, “Lamborghini Premium 1100 DT A” | 6,400 kg (14,110 lb)Traktorenlexikon, “Valmet Mega-8050” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 5,380 kg (11,861 lb)Traktorenlexikon, “Lamborghini Premium 1100 DT A” | 4,740 kg (10,450 lb)Traktorenlexikon, “Valmet Mega-8050” | Ahead (a fact, not an advantage)The Lamborghini 1100 DT is 14% heavier (640 kg / 1,411 lb) than the VALMET 8050 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Lamborghini Premium 1100 DT A” | 7,500 kg (16,535 lb)Traktorenlexikon, “Valmet Mega-8050” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 18 to 54Traktorenlexikon, “Lamborghini Premium 1100 DT A” | 12 to 36Traktorenlexikon, “Valmet Mega-8050” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 1100 DT and the 8050. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Lamborghini Premium 1100 DT A” | 30 km/h (18.6 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Valmet Mega-8050” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Lamborghini Premium 1100 DT A” | 540/1000 rpmTraktorenlexikon, “Valmet Mega-8050” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Lamborghini Premium 1100 DT A” | independentTraktorenlexikon, “Valmet Mega-8050” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Lamborghini Premium 1100 DT A” | 4WDTraktorenlexikon, “Valmet Mega-8050” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2000–2003 | 1995–2004 | Ahead (a fact, not an advantage)The Lamborghini 1100 DT is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Lamborghini 1100 DT is 14% heavier (640 kg / 1,411 lb) than the VALMET 8050 (both unladen weight, as stated by the source).
- The Lamborghini 1100 DT is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 1100 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 8050 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow and a creeper range.
← Every figure for both machines, side by side, with sources