Lamborghini 350 DT vs URSUS 2812

12 material differences

Tractor one

1992–2003

No measured PTO figure

Tractor two

1988–2009

No measured PTO figure

Which should you choose?

Read our verdict on the 350 DT and the 2812 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 1 fields identical or within 5%, which is not counted as material

Lamborghini 350 DT and URSUS 2812, field by field
Field	350 DT	2812	Gap
Engine
Engine power, claimed claimed	34.5 hp	37.4 hp	+9% 2812
Engine declared	MITSUBISHI K4 F-D	URSUS 3250	differs
Displacement declared	1.49 L	2.50 L	+68% 2812
Maximum torque declared	—	114 lb·ft · 155 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	15.5 mph · 25 km/h	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	5.0 gpm · 18.8 L/min	—
Pressure declared	—	3,002 psi · 207 bar	—
Three-point lift at ends declared	3,439 lb · 1,560 kg	3,012 lb · 1,366 kg	+14% 350 DT
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	2,447–2,601 lb · 1,110–1,180 kg	4,453 lb · 2,020 kg	differs
Maximum permissible mass declared	5,291 lb · 2,400 kg	—	—
Wheelbase declared	64.2 in · 1,630 mm	76.0 in · 1,930 mm	+18% 2812
Length declared	105.9 in · 2,690 mm	126.0 in · 3,200 mm	+19% 2812
Width declared	40.2 in · 1,020 mm	66.5 in · 1,690 mm	+66% 2812
Height declared	78.3 in · 1,990 mm	88.2 in · 2,240 mm	+13% 2812
Ground clearance declared	13.6 in · 345 mm	11.2 in · 285 mm	+21% 350 DT
Turning radius, braked declared	9.0 ft · 2.73 m	10.8 ft · 3.30 m	+21% 2812
Fuel tank declared	30.6 qt · 29.0 L	61.3 qt · 58.0 L	+100% 2812

Source

Source