Lamborghini Crono-Target 70 (DT) vs Massey Ferguson MF 4225 (A)

12 material differences

Tractor one

2005–2009

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the Crono-Target 70 (DT) and the MF 4225 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Lamborghini Crono-Target 70 (DT) and Massey Ferguson MF 4225 (A), field by field
Field	Crono-Target 70 (DT)	MF 4225 (A)	Gap
Engine
Engine power, claimed claimed	66.1 hp	64.1 hp	—
Engine declared	S.D.F. 1000.3 WT (EURO-II)	Perkins 4.41	differs
Displacement declared	3.00 L	4.08 L	+36% MF 4225 (A)
Maximum torque declared	192 lb·ft · 260 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry Lamborghini single-plate clutch	Pedal operated dry and air cooled single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	6,614 lb · 3,000 kg	5,401 lb · 2,450 kg	+22% Crono-Target 70 (DT)
Rear PTO speeds declared	540/540E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,564 lb · 2,070 kg	7,694 lb · 3,490 kg	+69% MF 4225 (A)
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	82.9 in · 2,105 mm	92.5 in · 2,350 mm	+12% MF 4225 (A)
Length declared	128.7 in · 3,270 mm	151.6 in · 3,850 mm	+18% MF 4225 (A)
Width declared	70.1 in · 1,780 mm	78.3 in · 1,990 mm	+12% MF 4225 (A)
Height declared	90.6 in · 2,300 mm	97.2 in · 2,468 mm	+7% MF 4225 (A)
Ground clearance declared	17.5 in · 445 mm	10.6 in · 270 mm	+65% Crono-Target 70 (DT)
Fuel tank declared	52.8 qt · 50.0 L	88.8 qt · 84.0 L	+68% MF 4225 (A)

Source

Source