Kramer KL 350 or MAN 2P1?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the KL 350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2P1 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Kramer KL 350 suits loader and hydraulic implement work better on this data: 69% (11.0 L/min / 2.9 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Kramer KL 350 and MAN 2P1, with the call on each
QuestionKL 3502P1Call
Which puts more power through the PTO shaft?25.6 kW (34.3 hp)Traktorenlexikon, “Kramer KL 350”25.6 kW (34.3 hp)Traktorenlexikon, “MAN 2P1”Not comparableNot comparable on power at the PTO shaft: the KL 350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2P1 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the KL 350 and the 2P1.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the KL 350 and the 2P1.
Which pumps more oil for implements?27.0 L/min (7.1 gpm)Traktorenlexikon, “Kramer KL 350”16 L/min (4.2 gpm)Traktorenlexikon, “MAN 2P1”AheadThe Kramer KL 350 has 69% more hydraulic flow (11.0 L/min / 2.9 gpm) than the MAN 2P1 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?——No figureNo call on three-point lift: no figure on record for the KL 350 and the 2P1.
Which is heavier, for traction?1,860 kg (4,101 lb)Traktorenlexikon, “Kramer KL 350”1,670 kg (3,682 lb)Traktorenlexikon, “MAN 2P1”Ahead (a fact, not an advantage)The Kramer KL 350 is 11% heavier (190 kg / 419 lb) than the MAN 2P1 (both unladen weight, as stated by the source).
Which may carry more ballast and load?2,550 kg (5,622 lb)Traktorenlexikon, “Kramer KL 350”—No figureNo call on maximum permissible mass: no figure on record for the 2P1.
Which has the wider choice of gears?10Traktorenlexikon, “Kramer KL 350”8Traktorenlexikon, “MAN 2P1”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?—YesTraktorenlexikon, “MAN 2P1”No figureNo call on a creeper range: not stated for the KL 350.
Which is faster on the road?20 km/h (12.4 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Kramer KL 350”18.4 km/h (11.4 mph) to 28.3 km/h (17.6 mph)Traktorenlexikon, “MAN 2P1”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1245Traktorenlexikon, “Kramer KL 350”540 rpm / 1000 rpmTraktorenlexikon, “MAN 2P1”No figureNo call on PTO speeds: no standard PTO speed stated for the KL 350.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Kramer KL 350”—No figureNo call on PTO independence: not stated for the 2P1.
Which drives on both axles?2WDTraktorenlexikon, “Kramer KL 350”2WDTraktorenlexikon, “MAN 2P1”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1966–19681960–1962Ahead (a fact, not an advantage)The Kramer KL 350 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Kramer KL 350 has 69% more hydraulic flow (11.0 L/min / 2.9 gpm) than the MAN 2P1 (both pump flow, as stated by the source).
  • The Kramer KL 350 is 11% heavier (190 kg / 419 lb) than the MAN 2P1 (both unladen weight, as stated by the source).
  • The Kramer KL 350 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: all two-wheel drive.
  • Not comparable on power at the PTO shaft: the KL 350 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 2P1 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources