John Deere 830 vs Massey Ferguson MF 177
5 material differences · fewer than 12
Which should you choose?
Read our verdict on the 830 and the MF 177 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 830 | MF 177 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.6 hp | 66.1 hp | +5% 830 |
| Engine declared | — | Perkins A 4.236 | — |
| Displacement declared | — | 3.87 L | — |
| Maximum torque declared | — | 193 lb·ft · 262 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20.0 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | — | pedal-operated dry double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.9 gpm · 33.7 L/min | — | — |
| Pressure declared | — | 3,001 psi · 207 bar | — |
| Three-point lift at ends declared | — | 3,373 lb · 1,530 kg | — |
| Rear PTO speeds declared | 536 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,851 lb · 3,561 kg | 6,151 lb · 2,790 kg | +28% 830 |
| Wheelbase declared | 85.2 in · 2,165 mm | 84.0 in · 2,134 mm | — |
| Length declared | 142.8 in · 3,626 mm | 139.4 in · 3,540 mm | — |
| Width declared | 79.5 in · 2,019 mm | 75.2 in · 1,910 mm | +6% 830 |
| Height declared | 81.0 in · 2,057 mm | 65.0 in · 1,650 mm | +25% 830 |
| Ground clearance declared | — | 17.3 in · 440 mm | — |
| Turning radius, braked declared | 15.5 ft · 4.72 m | 11.7 ft · 3.57 m | +32% 830 |
| Fuel tank declared | — | 86.6 qt · 82.0 L | — |
John Deere 830 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 830”
Massey Ferguson MF 177 sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 177”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”