John Deere 830 or Massey Ferguson MF 177?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 830 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 177 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 830 | MF 177 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 51.9 kW (69.6 hp)Traktorenlexikon, “John Deere Modell 830” | 49.3 kW (66.1 hp)Traktorenlexikon, “Massey Ferguson MF 177” | Not comparableNot comparable on power at the PTO shaft: the 830 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 177 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 830 and the MF 177. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 830 and the MF 177. |
| Which pumps more oil for implements? | 33.7 L/min (8.9 gpm)Traktorenlexikon, “John Deere Modell 830” | — | No figureNo call on hydraulic flow: no figure on record for the MF 177. |
| Which lifts more on the three-point hitch? | — | 1,530 kg (3,373 lb)Traktorenlexikon, “Massey Ferguson MF 177” | No figureNo call on three-point lift: no figure on record for the 830. |
| Which is heavier, for traction? | 3,561 kg (7,851 lb)Traktorenlexikon, “John Deere Modell 830” | 2,790 kg (6,151 lb)Traktorenlexikon, “Massey Ferguson MF 177” | Ahead (a fact, not an advantage)The John Deere 830 is 28% heavier (771 kg / 1,700 lb) than the Massey Ferguson MF 177 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 830 and the MF 177. |
| Which has the wider choice of gears? | 6Traktorenlexikon, “John Deere Modell 830” | 6 to 12Traktorenlexikon, “Massey Ferguson MF 177” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 830 and the MF 177. |
| Which is faster on the road? | 20.0 km/h (12.4 mph)Traktorenlexikon, “John Deere Modell 830” | 20 km/h (12.4 mph)Traktorenlexikon, “Massey Ferguson MF 177” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 536 rpmTraktorenlexikon, “John Deere Modell 830” | 540 rpmTraktorenlexikon, “Massey Ferguson MF 177” | No figureNo call on PTO speeds: no standard PTO speed stated for the 830. |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the 830 and the MF 177. |
| Which drives on both axles? | 2WDTraktorenlexikon, “John Deere Modell 830” | 2WDTraktorenlexikon, “Massey Ferguson MF 177” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1958–1960 | 1965–1968 | Ahead (a fact, not an advantage)The Massey Ferguson MF 177 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The John Deere 830 is 28% heavier (771 kg / 1,700 lb) than the Massey Ferguson MF 177 (both unladen weight, as stated by the source).
- The Massey Ferguson MF 177 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: all two-wheel drive.
- Not comparable on power at the PTO shaft: the 830 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 177 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range, PTO speeds and PTO independence.
← Every figure for both machines, side by side, with sources