John Deere 9400 T vs John Deere 9520 T
4 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because the 9400 T is on tracks, not an alternative to an ordinary tractor; the 9520 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
4 material differences · 10 fields identical or within 5%, which is not counted as material
| Field | 9400 T | 9520 T | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 419.5 hp | 444.1 hp | +6% 9520 T |
| Engine declared | John Deere 6.125 HRW-08 | John Deere-PowerTech 6.125 HRW-15 | differs |
| Displacement declared | 12.54 L | 12.54 L | — |
| Maximum torque declared | 1,154 lb·ft · 1,564 N·m | 1,221 lb·ft · 1,656 N·m | +6% 9520 T |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal operated hydraulic wet John Deere multi-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 32.2 gpm · 121.9 L/min | — | — |
| Three-point lift at ends declared | 13,669 lb · 6,200 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 42,454 lb · 19,257 kg | 36,795 lb · 16,690 kg | +15% 9400 T |
| Maximum permissible mass declared | 50,045 lb · 22,700 kg | 50,045 lb · 22,700 kg | — |
| Wheelbase declared | 111.0 in · 2,819 mm | 110.6 in · 2,810 mm | — |
| Length declared | 237.0 in · 6,020 mm | 237.0 in · 6,020 mm | — |
| Width declared | 143.5 in · 3,646 mm | 140.9 in · 3,580 mm | — |
| Height declared | 136.0 in · 3,454 mm | 136.0 in · 3,454 mm | — |
| Ground clearance declared | 14.5 in · 368 mm | 14.8 in · 375 mm | — |
| Fuel tank declared | 1,207.8 qt · 1,143.0 L | 1,092.6 qt · 1,034.0 L | +11% 9400 T |
John Deere 9400 T sources
Source
- Source: Traktorenlexikon, “John Deere 9400T”
- Source: OECD test report 1967, 2001
John Deere 9520 T sources
Source
- Source: Traktorenlexikon, “John Deere 9520T”
- Source: OECD test report 2042, 2003