John Deere 9300 T vs New Holland T 8050
12 material differences
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (73%); the drive differs (Tracks; 4WD); they were not built in overlapping years (1998–2002; 2007–2011); the 9300 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
12 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 9300 T | T 8050 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 355 hp | 321 hp | +11% 9300 T |
| Engine declared | John Deere 6.125 HRW-06 | CUMMINS 6 TAA-9004 (TIER-III) | differs |
| Displacement declared | 12.54 L | 8.85 L | +42% 9300 T |
| Maximum torque declared | 1,145 lb·ft · 1,553 N·m | 994 lb·ft · 1,348 N·m | +15% 9300 T |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Pedal-operated, hydraulic and oil-cooled John Deere multi-disc clutch | Electro-hydraulically operated wet multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 33.6 gpm · 127.2 L/min | 44.0 gpm · 166.6 L/min | +31% T 8050 |
| Pressure declared | 3,481 psi · 240 bar | 3,336 psi · 230 bar | — |
| Three-point lift at ends declared | 13,669 lb · 6,200 kg | 22,494 lb · 10,203 kg | +65% T 8050 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 41,925 lb · 19,017 kg | 24,268 lb · 11,008 kg | +73% 9300 T |
| Maximum permissible mass declared | 50,045 lb · 22,700 kg | 30,865 lb · 14,000 kg | +62% 9300 T |
| Wheelbase declared | 111.0 in · 2,819 mm | 121.2 in · 3,078 mm | +9% T 8050 |
| Length declared | 237.0 in · 6,020 mm | 229.5 in · 5,829 mm | — |
| Width declared | 143.5 in · 3,646 mm | 98.0 in · 2,490 mm | +46% 9300 T |
| Height declared | 136.0 in · 3,454 mm | 131.1 in · 3,331 mm | — |
| Ground clearance declared | 14.5 in · 368 mm | 14.6 in · 372 mm | — |
| Fuel tank declared | 1,207.8 qt · 1,143.0 L | 720.7 qt · 682.0 L | +68% 9300 T |
John Deere 9300 T sources
Source
- Source: Traktorenlexikon, “John Deere 9300T”
- Source: OECD test report 1966, 2001
New Holland T 8050 sources
Source
- Source: Traktorenlexikon, “New Holland T8050”