11 material differences · fewer than 12
Tractor oneJohn Deere 89601989–1993No measured PTO figureTractor twoNew Holland TJ-3752001–2005No measured PTO figure
Which should you choose?
Read our verdict on the 8960 and the TJ-375 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 8960 | TJ-375 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 365.2 hp | 369.9 hp | — |
| Engine declared | Cummins NTA 855 A 370 | CUMMINS QSX-15 | differs |
| Displacement declared | 14.01 L | 14.95 L | +7% TJ-375 |
| Maximum torque declared | 1,279 lb·ft · 1,734 N·m | 1,325 lb·ft · 1,797 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 21.7 mph · 35 km/h | differs |
| Clutch declared | Pedal-operated hydraulic and oil-cooled double disc clutch | Pedal operated electrohydraulic wet Fuji-Univance multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | — | 40.9 gpm · 154.8 L/min | — |
| Pressure declared | 2,857–3,162 psi · 197–218 bar | 2,596–2,698 psi · 179–186 bar | differs |
| Three-point lift, at the coupling points declared | 11,795–12,125 lb · 5,350–5,500 kg | 19,632 lb · 8,905 kg | differs |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 35,109 lb · 15,925 kg | 37,620 lb · 17,064 kg | +7% TJ-375 |
| Maximum permissible mass declared | — | 39,683 lb · 18,000 kg | — |
| Wheelbase declared | 133.9 in · 3,400 mm | 154.0 in · 3,911 mm | +15% TJ-375 |
| Length declared | 286.1 in · 7,266 mm | 297.6 in · 7,558 mm | — |
| Width declared | 152.4–165.0 in · 3,870–4,190 mm | 145.0 in · 3,683 mm | differs |
| Ground clearance declared | 14.9 in · 378 mm | 13.1 in · 334 mm | +13% 8960 |
| Fuel tank declared | 882.3 qt · 835.0 L | 1,200.4 qt · 1,136.0 L | +36% TJ-375 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 8960 sources
- Source: Traktorenlexikon, “John Deere 8960”
New Holland TJ-375 sources
- Source: Traktorenlexikon, “New Holland TJ375”