John Deere 8960 or New Holland TJ-375?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland TJ-375: three-point lift.
- The New Holland TJ-375 suits loader and hydraulic implement work better on this data: 62% (3,405 kg / 7,507 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 8960 | TJ-375 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 247.8 kW (332.3 hp)Traktorenlexikon, “John Deere 8960” | 252.0 kW (337.9 hp)Traktorenlexikon, “New Holland TJ375” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 8960 and the TJ-375. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 8960 and the TJ-375. |
| Which pumps more oil for implements? | — | 154.8 L/min (40.9 gpm)Traktorenlexikon, “New Holland TJ375” | No figureNo call on hydraulic flow: no figure on record for the 8960. |
| Which lifts more on the three-point hitch? | 5,350 kg (11,795 lb) to 5,500 kg (12,125 lb)Traktorenlexikon, “John Deere 8960” | 8,905 kg (19,632 lb)Traktorenlexikon, “New Holland TJ375” | AheadThe New Holland TJ-375 has 62% more lift (3,405 kg / 7,507 lb) than the John Deere 8960 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 15,925 kg (35,109 lb)Traktorenlexikon, “John Deere 8960” | 17,064 kg (37,620 lb)Traktorenlexikon, “New Holland TJ375” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 18,000 kg (39,683 lb)Traktorenlexikon, “New Holland TJ375” | No figureNo call on maximum permissible mass: no figure on record for the 8960. |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “John Deere 8960” | 16 to 24Traktorenlexikon, “New Holland TJ375” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | YesTraktorenlexikon, “New Holland TJ375” | No figureNo call on a creeper range: not stated for the 8960. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “John Deere 8960” | 35 km/h (21.7 mph)Traktorenlexikon, “New Holland TJ375” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “John Deere 8960” | 1000 rpmTraktorenlexikon, “New Holland TJ375” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “John Deere 8960” | — | No figureNo call on PTO independence: not stated for the TJ-375. |
| Which drives on both axles? | 4WDTraktorenlexikon, “John Deere 8960” | 4WDTraktorenlexikon, “New Holland TJ375” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1989–1993 | 2001–2005 | Ahead (a fact, not an advantage)The New Holland TJ-375 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland TJ-375 has 62% more lift (3,405 kg / 7,507 lb) than the John Deere 8960 (both lift at the hitch ends, as stated by the source).
- The New Holland TJ-375 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources