John Deere 7610 vs New Holland TM 150 (Traktorenlexikon)
11 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their power is not stated as the same quantity on both. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 7610 | TM 150 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 126.9 hp | — | — |
| Drawbar power, measured measured | 114.0 hp | — | — |
| Engine | |||
| Engine power, claimed claimed | — | 138 hp | — |
| Engine declared | John Deere 6068TRW72 | NEW HOLLAND 675-T/WV | differs |
| Displacement declared | 6.79 L | 7.48 L | +10% TM 150 |
| Maximum torque declared | 420 lb·ft · 569.0 N·m | 439 lb·ft · 595 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–31.1 mph · 30–50 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Pedal-operated hydraulic wet John Deere multi-plate clutch | Electro-hydraulic oil-immersed multi-plate drive clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 26.9 gpm · 102.0 L/min | 31.2 gpm · 118.2 L/min | +16% TM 150 |
| Pressure declared | 2,538 psi · 175 bar | 2,466 psi · 170 bar | — |
| Three-point lift at ends declared | — | 15,335 lb · 6,956 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,653–14,480 lb · 6,193–6,568 kg | 13,962 lb · 6,333 kg | — |
| Maximum permissible mass declared | 25,353 lb · 11,500 kg | 22,046 lb · 10,000 kg | +15% 7610 |
| Wheelbase declared | 110.2–114.2 in · 2,800–2,900 mm | 107.2 in · 2,723 mm | differs |
| Length declared | 187.2 in · 4,755 mm | 185.2 in · 4,705 mm | — |
| Width declared | 118.7 in · 3,015 mm | 86.0 in · 2,184 mm | +38% 7610 |
| Height declared | 117.0 in · 2,973 mm | 116.7 in · 2,963 mm | — |
| Ground clearance declared | 18.3 in · 465 mm | 15.4 in · 390 mm | +19% 7610 |
| Turning radius, braked declared | — | 19.2 ft · 5.85 m | — |
| Fuel tank declared | 259.9 qt · 246 L | 343.4 qt · 325.0 L | +32% TM 150 |
John Deere 7610 sources
Source
- Source: OECD test report 1961, 2001
- Source: Traktorenlexikon, “John Deere 7610”
New Holland TM 150 (Traktorenlexikon) sources
Source
- Source: Traktorenlexikon, “New Holland TM150”