John Deere 6410 vs VALMET 6800-4

8 material differences · fewer than 12

Tractor one

1997–2003

98.0 hp

Measured at the PTO · OECD Test 1806

Tractor two

1996–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 6410 and the 6800-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

John Deere 6410 and VALMET 6800-4, field by field
Field	6410	6800-4	Gap
Measured performance
PTO power, measured measured	98.0 hp	—	—
Drawbar power, measured measured	79.7 hp	—	—
Engine
Engine power, claimed claimed	—	113.5 hp	—
Engine declared	John Deere 4045TL056	VALMET 420 DWI (420 DWRIE)	differs
Displacement declared	4.53 L	4.40 L	—
Maximum torque declared	307 lb·ft · 416.0 N·m	—	—
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	18.6–31.1 mph · 30–50 km/h	—
Clutch declared	—	Pedal-operated, dry Fichtel & Sachs single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	—	21.2 gpm · 80.3 L/min	—
Pressure declared	3,017–3,220 psi · 208–222 bar	2,031–2,248 psi · 140–155 bar	differs
Three-point lift at ends declared	13,264 lb · 6,016 kg	—	—
Rear PTO speeds declared	540E/540/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,039–9,678 lb · 4,100–4,390 kg	9,722 lb · 4,410 kg	differs
Maximum permissible mass declared	17,637 lb · 8,000 kg	16,535 lb · 7,500 kg	+7% 6410
Wheelbase declared	95.7 in · 2,430 mm	91.6 in · 2,326 mm	—
Length declared	181.5 in · 4,610 mm	177.7 in · 4,514 mm	—
Width declared	87.4 in · 2,220 mm	78.1 in · 1,985 mm	+12% 6410
Height declared	106.1 in · 2,694 mm	108.3 in · 2,750 mm	—
Ground clearance declared	17.2 in · 436 mm	19.1 in · 485 mm	+11% 6800-4
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	195.5 qt · 185.0 L	174.4 qt · 165.0 L	+12% 6410

Source

Source