John Deere 5300 (A) vs Massey Ferguson MF 4320 (A)

10 material differences · fewer than 12

Tractor one

1992–1997

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 5300 (A) and the MF 4320 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere 5300 (A) and Massey Ferguson MF 4320 (A), field by field
Field	5300 (A)	MF 4320 (A)	Gap
Engine
Engine power, claimed claimed	49.3 hp	63.2 hp	+28% MF 4320 (A)
Engine declared	John Deere 3.029	Perkins 903.27 Turbo	differs
Displacement declared	2.94 L	2.50 L	+18% 5300 (A)
Maximum torque declared	133 lb·ft · 180 N·m	171 lb·ft · 232 N·m	+29% MF 4320 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry CARRARO single-disc clutch	pedal-operated dry and air-cooled single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	11.6 gpm · 43.9 L/min	15.9 gpm · 60.0 L/min	+37% MF 4320 (A)
Pressure declared	3,408 psi · 235 bar	—	—
Three-point lift at ends declared	3,803 lb · 1,725 kg	4,946 lb · 2,243 kg	+30% MF 4320 (A)
Rear PTO speeds declared	540 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	4,550 lb · 2,064 kg	5,258 lb · 2,385 kg	+16% MF 4320 (A)
Maximum permissible mass declared	—	11,464 lb · 5,200 kg	—
Wheelbase declared	80.7 in · 2,050 mm	83.9 in · 2,130 mm	—
Length declared	139.4 in · 3,541 mm	147.2 in · 3,740 mm	+6% MF 4320 (A)
Width declared	72.7 in · 1,846 mm	73.2 in · 1,860 mm	—
Height declared	90.1 in · 2,289 mm	94.1 in · 2,390 mm	—
Ground clearance declared	19.3 in · 490 mm	18.5 in · 470 mm	—
Turning radius, braked declared	9.8 ft · 3.00 m	—	—
Fuel tank declared	72.0 qt · 68.1 L	88.8 qt · 84.0 L	+23% MF 4320 (A)

Source

Source