11 material differences · fewer than 12
Tractor oneJohn Deere 5200 (A)1992–1997No measured PTO figureTractor twoNew Holland 32351996–1999No measured PTO figure
Which should you choose?
Read our verdict on the 5200 (A) and the 3235 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 5200 (A) | 3235 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 39.4 hp | 38.5 hp | — |
| Engine declared | John Deere 3.029 | IVECO 8035.06 | differs |
| Displacement declared | 2.94 L | 2.71 L | +9% 5200 (A) |
| Maximum torque declared | 115 lb·ft · 156 N·m | 99 lb·ft · 134 N·m | +16% 5200 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal-operated dry CARRARO single-disc clutch | Dry OMG or LuK double clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | Open centre | — |
| Pump flow declared | 11.8 gpm · 44.7 L/min | 9.2 gpm · 35.0 L/min | +28% 5200 (A) |
| Pressure declared | 3,408 psi · 235 bar | 3,263 psi · 225 bar | — |
| Three-point lift, at the coupling points declared | 3,803 lb · 1,725 kg | 3,726 lb · 1,690 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,248 lb · 1,927 kg | 3,792 lb · 1,720 kg | +12% 5200 (A) |
| Wheelbase declared | 80.7 in · 2,050 mm | 78.7 in · 1,999 mm | — |
| Length declared | 139.4 in · 3,541 mm | 128.0 in · 3,250 mm | +9% 5200 (A) |
| Width declared | 72.7–88.5 in · 1,846–2,249 mm | 64.6–84.3 in · 1,640–2,140 mm | differs |
| Ground clearance declared | 19.3 in · 490 mm | 14.8 in · 375 mm | +31% 5200 (A) |
| Turning radius, braked declared | 9.8 ft · 3.00 m | 10.1 ft · 3.07 m | — |
| Fuel tank declared | 72.0 qt · 68.1 L | 44.4 qt · 42.0 L | +62% 5200 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 5200 (A) sources
- Source: Traktorenlexikon, “John Deere 5200 (USA)”
New Holland 3235 sources
- Source: Traktorenlexikon, “New Holland 3235”
- Source: Traktorenlexikon, “New Holland 3435”