John Deere 3050 (A) vs Steyr 9094 a

8 material differences · fewer than 12

Tractor one

1986–1993

No measured PTO figure

Tractor two

1993–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 3050 (A) and the 9094 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 10 fields identical or within 5%, which is not counted as material

John Deere 3050 (A) and Steyr 9094 a, field by field
Field	3050 (A)	9094 a	Gap
Engine
Engine power, claimed claimed	90.8 hp	92.8 hp	—
Engine declared	John Deere 6.359 DL-008	Steyr-MWM WD 401.85	differs
Displacement declared	5.88 L	4.16 L	+42% 3050 (A)
Maximum torque declared	251 lb·ft · 340 N·m	260 lb·ft · 353 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	Open centre	differs
Pump flow declared	13.8 gpm · 52.3 L/min	14.1 gpm · 53.3 L/min	—
Pressure declared	3,336 psi · 230 bar	3,481 psi · 240 bar	—
Three-point lift at ends declared	9,978 lb · 4,526 kg	10,031 lb · 4,550 kg	—
Rear PTO speeds declared	540/1000 rpm	390/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,642 lb · 3,920 kg	8,642 lb · 3,920 kg	—
Maximum permissible mass declared	14,771 lb · 6,700 kg	14,330 lb · 6,500 kg	—
Wheelbase declared	100.4 in · 2,551 mm	97.5 in · 2,477 mm	—
Length declared	188.5 in · 4,787 mm	165.2 in · 4,195 mm	+14% 3050 (A)
Width declared	83.8 in · 2,129 mm	81.2 in · 2,063 mm	—
Height declared	116.7 in · 2,964 mm	107.5 in · 2,730 mm	+9% 3050 (A)
Ground clearance declared	25.6 in · 650 mm	17.7 in · 450 mm	+44% 3050 (A)
Turning radius, braked declared	—	15.7 ft · 4.80 m	—
Fuel tank declared	127.9–182.8 qt · 121.0–173.0 L	105.7 qt · 100.0 L	differs

Source

Source