10 material differences · fewer than 12
Tractor oneJohn Deere 2100 (A)1993–1996No measured PTO figureTractor twoLandini 6060 (DT) TL-39 N/K (TL-39 DT/K)1993–2000No measured PTO figure
Which should you choose?
Read our verdict on the 2100 (A) and the 6060 (DT) TL-39 N/K (TL-39 DT/K) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 2100 (A) | 6060 (DT) TL-39 N/K (TL-39 DT/K) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 56 hp | 57.3 hp | — |
| Engine declared | ZETOR 6201 | Perkins AT 3.152-4 | differs |
| Displacement declared | 3.46 L | 2.50 L | +38% 2100 (A) |
| Maximum torque declared | 148 lb·ft · 200 N·m | 155 lb·ft · 210 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry Zetor double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.4 gpm · 31.8 L/min | 9.9 gpm · 37.6 L/min | +18% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Pressure declared | 1,160 psi · 80 bar | 2,756 psi · 190 bar | +138% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,581 lb · 2,985 kg | 5,291 lb · 2,400 kg | +24% 2100 (A) |
| Maximum permissible mass declared | 12,125 lb · 5,500 kg | — | — |
| Wheelbase declared | 88.8 in · 2,256 mm | 83.7 in · 2,126 mm | +6% 2100 (A) |
| Length declared | 148.0 in · 3,760 mm | 139.4 in · 3,540 mm | +6% 2100 (A) |
| Width declared | 70.9–85.8 in · 1,800–2,180 mm | 75.8 in · 1,925 mm | differs |
| Ground clearance declared | 17.0 in · 432 mm | 19.3 in · 490 mm | +13% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
| Turning radius, braked declared | — | 11.7 ft · 3.57 m | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 90.9 qt · 86.0 L | +23% 6060 (DT) TL-39 N/K (TL-39 DT/K) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 2100 (A) sources
- Source: Traktorenlexikon, “John Deere 2100”
Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) sources
- Source: Traktorenlexikon, “Landini 6060”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”