John Deere 2100 (A) or Landini 6060 (DT) TL-39 N/K (TL-39 DT/K)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 2100 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6060 (DT) TL-39 N/K (TL-39 DT/K) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 2100 (A) | 6060 (DT) TL-39 N/K (TL-39 DT/K) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 42 kW (56 hp)Traktorenlexikon, “John Deere 2100” | 42.7 kW (57.3 hp)Traktorenlexikon, “Landini 6060” | Not comparableNot comparable on power at the PTO shaft: the 2100 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6060 (DT) TL-39 N/K (TL-39 DT/K) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 2100 (A) and the 6060 (DT) TL-39 N/K (TL-39 DT/K). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 2100 (A) and the 6060 (DT) TL-39 N/K (TL-39 DT/K). |
| Which pumps more oil for implements? | 31.8 L/min (8.4 gpm)Traktorenlexikon, “John Deere 2100” | 37.6 L/min (9.9 gpm)Traktorenlexikon, “Landini 6060” | AheadThe Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) has 18% more hydraulic flow (5.8 L/min / 1.5 gpm) than the John Deere 2100 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,900 kg (6,393 lb)Traktorenlexikon, “John Deere 2100” | 2,008 kg (4,427 lb)Traktorenlexikon, “Landini 6060” | AheadThe John Deere 2100 (A) has 44% more lift (892 kg / 1,967 lb) than the Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,985 kg (6,581 lb)Traktorenlexikon, “John Deere 2100” | 2,400 kg (5,291 lb)Traktorenlexikon, “Landini 6060” | Ahead (a fact, not an advantage)The John Deere 2100 (A) is 24% heavier (585 kg / 1,290 lb) than the Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 5,500 kg (12,125 lb)Traktorenlexikon, “John Deere 2100” | — | No figureNo call on maximum permissible mass: no figure on record for the 6060 (DT) TL-39 N/K (TL-39 DT/K). |
| Which has the wider choice of gears? | 10Traktorenlexikon, “John Deere 2100” | 12 to 24Traktorenlexikon, “Landini 6060” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 2100 (A) and the 6060 (DT) TL-39 N/K (TL-39 DT/K). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 2100” | 30 km/h (18.6 mph)Traktorenlexikon, “Landini 6060” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “John Deere 2100” | 540/1000 rpmTraktorenlexikon, “Landini 6060” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Landini 6060” | No figureNo call on PTO independence: not stated for the 2100 (A). |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “John Deere 2100” | Two-wheel or four-wheel driveTraktorenlexikon, “Landini 6060” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–1996 | 1993–2000 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) has 18% more hydraulic flow (5.8 L/min / 1.5 gpm) than the John Deere 2100 (A) (both pump flow, as stated by the source).
- The John Deere 2100 (A) has 44% more lift (892 kg / 1,967 lb) than the Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) (both lift at the hitch ends, as stated by the source).
- The John Deere 2100 (A) is 24% heavier (585 kg / 1,290 lb) than the Landini 6060 (DT) TL-39 N/K (TL-39 DT/K) (both unladen weight, as stated by the source).
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 2100 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6060 (DT) TL-39 N/K (TL-39 DT/K) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources