John Deere 2000 (A) vs UTB U-453 DT

11 material differences · fewer than 12

Tractor one

1993–1996

No measured PTO figure

Tractor two

1988–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 2000 (A) and the U-453 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

John Deere 2000 (A) and UTB U-453 DT, field by field
Field	2000 (A)	U-453 DT	Gap
Engine
Engine power, claimed claimed	44.4 hp	44.4 hp	—
Engine declared	ZETOR 5201	UTB D-115.000	differs
Displacement declared	2.70 L	2.40 L	+12% 2000 (A)
Maximum torque declared	117 lb·ft · 158 N·m	97 lb·ft · 132 N·m	+20% 2000 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 2000 (A)
Clutch declared	Dry Zetor double clutch	Dry UTB double clutch	differs
Hydraulics & hitch
Pump flow declared	8.5 gpm · 32.0 L/min	9.0 gpm · 34.0 L/min	+6% U-453 DT
Pressure declared	1,160 psi · 80 bar	2,031 psi · 140 bar	+75% U-453 DT
Three-point lift at ends declared	4,475 lb · 2,030 kg	3,594 lb · 1,630 kg	+25% 2000 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,382 lb · 2,895 kg	6,393 lb · 2,900 kg	—
Maximum permissible mass declared	12,125 lb · 5,500 kg	—	—
Wheelbase declared	83.2 in · 2,114 mm	83.9 in · 2,130 mm	—
Length declared	143.3 in · 3,640 mm	141.1 in · 3,585 mm	—
Width declared	70.9 in · 1,800 mm	70.4 in · 1,788 mm	—
Height declared	103.9 in · 2,640 mm	94.5 in · 2,400 mm	+10% 2000 (A)
Ground clearance declared	14.8 in · 375 mm	9.1 in · 230 mm	+63% 2000 (A)
Fuel tank declared	74.0 qt · 70.0 L	65.5 qt · 62.0 L	+13% 2000 (A)

Source

Source