4 material differences · fewer than 12
Tractor oneJ.I. Case 9401962–1969No measured PTO figureTractor twoJ.I. Case 941 GP1959–1969No measured PTO figure
Which should you choose?
Read our verdict on the 940 and the 941 GP → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 940 | 941 GP | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.0 hp | 83.0 hp | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | pedal-operated dry CASE single-disc clutch | Pedal-operated dry CASE single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 15.5 gpm · 58.7 L/min | 15.5 gpm · 58.7 L/min | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,852 lb · 4,015 kg | 8,805 lb · 3,994 kg | — |
| Wheelbase declared | 83.8 in · 2,129 mm | 108.0 in · 2,743 mm | +29% 941 GP |
| Length declared | 141.0 in · 3,581 mm | 162.0 in · 4,115 mm | +15% 941 GP |
| Width declared | 84.0 in · 2,134 mm | 85.2 in · 2,165 mm | — |
| Height, over the bonnet declared | 64.3 in · 1,634 mm | 66.0 in · 1,676 mm | — |
| Ground clearance declared | 17.5 in · 445 mm | 17.0 in · 432 mm | — |
| Turning radius, braked declared | 9.5 ft · 2.90 m | 10.8 ft · 3.30 m | +14% 941 GP |
| Fuel tank declared | 95.9–120.0 qt · 90.8–113.6 L | 95.9–120.0 qt · 90.8–113.6 L | — |
J.I. Case 940 sources
Source
- Source: Traktorenlexikon, “Case 940”
J.I. Case 941 GP sources
Source
- Source: Traktorenlexikon, “Case 941”