9 material differences · fewer than 12

Tractor oneJ.I. Case 7301960–1969No measured PTO figureTractor twoLeyland 2701973–1975No measured PTO figure

Which should you choose?

Read our verdict on the 730 and the 270 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

9 material differences · 1 fields identical or within 5%, which is not counted as material

J.I. Case 730 and Leyland 270, field by field
Field	730	270	Gap
Engine
Engine power, claimed claimed	57.9 hp	70.0 hp	+21% 270
Engine declared	—	LEYLAND-MOTORS 4/98 NT	—
Displacement declared	—	3.77 L	—
Maximum torque declared	—	190 lb·ft · 258 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	16.2 mph · 26 km/h	+15% 730
Clutch declared	—	Dry Borg & Beck double clutch	—
Hydraulics & hitch
Pump flow declared	15.5 gpm · 58.7 L/min	8.5 gpm · 32.3 L/min	+82% 730
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	7,000 lb · 3,175 kg	5,765 lb · 2,615 kg	+21% 730
Wheelbase declared	102.0 in · 2,591 mm	80.2 in · 2,038 mm	+27% 730
Length declared	156.0 in · 3,962 mm	144.9 in · 3,680 mm	+8% 730
Width declared	88.0 in · 2,235 mm	80.3 in · 2,040 mm	+10% 730
Ground clearance declared	15.0 in · 381 mm	16.9 in · 429 mm	+13% 270
Turning radius, braked declared	7.1 ft · 2.16 m	11.0 ft · 3.35 m	+55% 270
Fuel tank declared	69.2 qt · 65.5 L	72.0 qt · 68.1 L	—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

J.I. Case 730 sources

Source

Source: Traktorenlexikon, “Case 730”

Leyland 270 sources