J.I. Case 730 or Leyland 270?

Which should you choose?

On performance, every comparable figure that differs favours the J.I. Case 730: hydraulic flow. It is also ahead on top speed and PTO speeds.

  • The J.I. Case 730 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The J.I. Case 730 suits loader and hydraulic implement work better on this data: 82% (26.4 L/min / 7.0 gpm) more hydraulic flow.
  • The J.I. Case 730 suits road haulage better on this data: 15% (4.0 km/h / 2.5 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 730 and Leyland 270, with the call on each
Question730270Call
Which puts more power through the PTO shaft?41.6 kW (55.7 hp)Traktorenlexikon, “Case 730”41.8 kW (56.1 hp)Traktorenlexikon, “Leyland 270”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 730 and the 270.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 730 and the 270.
Which pumps more oil for implements?58.7 L/min (15.5 gpm)Traktorenlexikon, “Case 730”32.3 L/min (8.5 gpm)Traktorenlexikon, “Leyland 270”AheadThe J.I. Case 730 has 82% more hydraulic flow (26.4 L/min / 7.0 gpm) than the Leyland 270 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,814 kg (3,999 lb)Traktorenlexikon, “Leyland 270”No figureNo call on three-point lift: no figure on record for the 730.
Which is heavier, for traction?3,175 kg (7,000 lb)Traktorenlexikon, “Case 730”2,615 kg (5,765 lb)Traktorenlexikon, “Leyland 270”Ahead (a fact, not an advantage)The J.I. Case 730 is 21% heavier (560 kg / 1,235 lb) than the Leyland 270 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 730 and the 270.
Which has the wider choice of gears?8Traktorenlexikon, “Case 730”10Traktorenlexikon, “Leyland 270”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 730 and the 270.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Case 730”26 km/h (16.2 mph)Traktorenlexikon, “Leyland 270”AheadThe J.I. Case 730 has 15% more top speed (4.0 km/h / 2.5 mph) than the Leyland 270 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case 730”540 rpmTraktorenlexikon, “Leyland 270”AheadThe J.I. Case 730 offers 1000 rpm at the PTO, which the Leyland 270 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case 730”independentTraktorenlexikon, “Leyland 270”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Case 730”2WDTraktorenlexikon, “Leyland 270”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1960–19691973–1975Ahead (a fact, not an advantage)The Leyland 270 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 730 has 82% more hydraulic flow (26.4 L/min / 7.0 gpm) than the Leyland 270 (both pump flow, as stated by the source).
  • The J.I. Case 730 is 21% heavier (560 kg / 1,235 lb) than the Leyland 270 (both unladen weight, as stated by the source).
  • The J.I. Case 730 has 15% more top speed (4.0 km/h / 2.5 mph) than the Leyland 270 (both top speed forward, as stated by the source).
  • The J.I. Case 730 offers 1000 rpm at the PTO, which the Leyland 270 does not (as stated by the sources).
  • The Leyland 270 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources