J.I. Case 610-B vs Landini R-5500 (DT) "TL 22 N/A"

10 material differences · fewer than 12

Tractor one

1958–1959

No measured PTO figure

Tractor two

1973–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 610-B and the R-5500 (DT) "TL 22 N/A" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 1 fields identical or within 5%, which is not counted as material

J.I. Case 610-B and Landini R-5500 (DT) "TL 22 N/A", field by field
Field	610-B	R-5500 (DT) "TL 22 N/A"	Gap
Engine
Engine power, claimed claimed	44.4 hp	49.3 hp	+11% R-5500 (DT) "TL 22 N/A"
Engine declared	CASE 164	Perkins AD 3.152 S	differs
Displacement declared	2.70 L	2.50 L	+8% 610-B
Maximum torque declared	—	128 lb·ft · 173 N·m	—
Transmission
Top speed declared	12.4–15.5 mph · 20–25 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Pedal-operated CASE single-plate clutch, in conjunction with pedal valve-operated torque converter	—	—
Hydraulics & hitch
Pump flow declared	3.0 gpm · 11.4 L/min	7.6 gpm · 28.6 L/min	+151% R-5500 (DT) "TL 22 N/A"
Three-point lift at ends declared	—	4,519 lb · 2,050 kg	—
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	4,008 lb · 1,818 kg	4,431 lb · 2,010 kg	+11% R-5500 (DT) "TL 22 N/A"
Wheelbase declared	78.5 in · 1,994 mm	81.9 in · 2,080 mm	—
Length declared	121.5 in · 3,086 mm	138.6 in · 3,520 mm	+14% R-5500 (DT) "TL 22 N/A"
Width declared	63.3 in · 1,608 mm	69.3 in · 1,760 mm	+9% R-5500 (DT) "TL 22 N/A"
Height declared	63.4 in · 1,610 mm	88.2 in · 2,240 mm	+39% R-5500 (DT) "TL 22 N/A"
Ground clearance declared	—	16.5 in · 420 mm	—
Turning radius, braked declared	—	10.9 ft · 3.31 m	—
Fuel tank declared	55.2 qt · 52.2 L	64.5 qt · 61.0 L	+17% R-5500 (DT) "TL 22 N/A"

Source

Source