J.I. Case 2294 (DT) vs Massey Ferguson MF 6280 (A)

12 material differences

Tractor one

1984–1985

No measured PTO figure

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 2294 (DT) and the MF 6280 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

J.I. Case 2294 (DT) and Massey Ferguson MF 6280 (A), field by field
Field	2294 (DT)	MF 6280 (A)	Gap
Engine
Engine power, claimed claimed	139.1 hp	123 hp	+13% 2294 (DT)
Engine declared	CASE 504 BDT	Perkins 1006.60 T	differs
Displacement declared	8.26 L	5.99 L	+38% 2294 (DT)
Maximum torque declared	470 lb·ft · 637 N·m	371 lb·ft · 503 N·m	+27% 2294 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% MF 6280 (A)
Clutch declared	pedal-operated wet disc clutch	Pedal-operated hydraulic Valeo multi-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	25.3 gpm · 95.7 L/min	—
Pressure declared	—	3,336 psi · 230 bar	—
Three-point lift at ends declared	9,998 lb · 4,535 kg	15,653 lb · 7,100 kg	+57% MF 6280 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	14,390 lb · 6,527 kg	10,615 lb · 4,815 kg	+36% 2294 (DT)
Maximum permissible mass declared	—	20,283 lb · 9,200 kg	—
Wheelbase declared	104.0–110.0 in · 2,642–2,794 mm	107.1 in · 2,720 mm	—
Length declared	175.5 in · 4,458 mm	173.0–202.0 in · 4,394–5,131 mm	differs
Width declared	96.0 in · 2,438 mm	108.7 in · 2,760 mm	+13% MF 6280 (A)
Height declared	116.5 in · 2,960 mm	112.9 in · 2,867 mm	—
Ground clearance declared	19.5 in · 495 mm	22.8 in · 580 mm	+17% MF 6280 (A)
Turning radius, braked declared	13.5 ft · 4.12 m	—	—
Fuel tank declared	259.9 qt · 246.0 L	169.1 qt · 160 L	+54% 2294 (DT)

Source

Source