J.I. Case 2294 (DT) or Massey Ferguson MF 6280 (A)?

Which should you choose?

On performance, every comparable figure that differs favours the Massey Ferguson MF 6280 (A): three-point lift. It is also ahead on forward gears, top speed and drive.

  • The Massey Ferguson MF 6280 (A) suits loader and hydraulic implement work better on this data: 57% (2,565 kg / 5,655 lb) more three-point lift.
  • The Massey Ferguson MF 6280 (A) suits road haulage better on this data: 33% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for J.I. Case 2294 (DT) and Massey Ferguson MF 6280 (A), with the call on each
Question2294 (DT)MF 6280 (A)Call
Which puts more power through the PTO shaft?86.1 kW (115.5 hp)Traktorenlexikon, “Case 2294”87.2 kW (116.9 hp)Traktorenlexikon, “Massey Ferguson MF 6280”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 2294 (DT) and the MF 6280 (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 2294 (DT) and the MF 6280 (A).
Which pumps more oil for implements?95.7 L/min (25.3 gpm)Traktorenlexikon, “Massey Ferguson MF 6280”No figureNo call on hydraulic flow: no figure on record for the 2294 (DT).
Which lifts more on the three-point hitch?4,535 kg (9,998 lb)Traktorenlexikon, “Case 2294”7,100 kg (15,653 lb)Traktorenlexikon, “Massey Ferguson MF 6280”AheadThe Massey Ferguson MF 6280 (A) has 57% more lift (2,565 kg / 5,655 lb) than the J.I. Case 2294 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?6,527 kg (14,390 lb)Traktorenlexikon, “Case 2294”4,815 kg (10,615 lb)Traktorenlexikon, “Massey Ferguson MF 6280”Ahead (a fact, not an advantage)The J.I. Case 2294 (DT) is 36% heavier (1,712 kg / 3,774 lb) than the Massey Ferguson MF 6280 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?9,200 kg (20,283 lb)Traktorenlexikon, “Massey Ferguson MF 6280”No figureNo call on maximum permissible mass: no figure on record for the 2294 (DT).
Which has the wider choice of gears?12Traktorenlexikon, “Case 2294”16 to 32Traktorenlexikon, “Massey Ferguson MF 6280”AheadThe Massey Ferguson MF 6280 (A) has 33% more forward gears (4 gears) than the J.I. Case 2294 (DT) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 2294 (DT) and the MF 6280 (A).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Case 2294”40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 6280”AheadThe Massey Ferguson MF 6280 (A) has 33% more top speed (10.0 km/h / 6.2 mph) than the J.I. Case 2294 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Case 2294”540/1000/540E/1000E rpmTraktorenlexikon, “Massey Ferguson MF 6280”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Case 2294”independentTraktorenlexikon, “Massey Ferguson MF 6280”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Case 2294”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 6280”AheadThe Massey Ferguson MF 6280 (A) is available with four-wheel drive; the J.I. Case 2294 (DT) is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1984–19851999–2003Ahead (a fact, not an advantage)The Massey Ferguson MF 6280 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 6280 (A) has 57% more lift (2,565 kg / 5,655 lb) than the J.I. Case 2294 (DT) (both lift at the hitch ends, as stated by the source).
  • The J.I. Case 2294 (DT) is 36% heavier (1,712 kg / 3,774 lb) than the Massey Ferguson MF 6280 (A) (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 6280 (A) has 33% more forward gears (4 gears) than the J.I. Case 2294 (DT) (both forward gears, as stated by the source).
  • The Massey Ferguson MF 6280 (A) has 33% more top speed (10.0 km/h / 6.2 mph) than the J.I. Case 2294 (DT) (both top speed forward, as stated by the source).
  • The Massey Ferguson MF 6280 (A) is available with four-wheel drive; the J.I. Case 2294 (DT) is two-wheel drive (as stated by the sources).
  • The Massey Ferguson MF 6280 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources