J.I. Case 2096 (DT) vs Massey Ferguson MF 3630

8 material differences · fewer than 12

Tractor one

1984–1985

No measured PTO figure

Tractor two

1987–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 2096 (DT) and the MF 3630 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

J.I. Case 2096 (DT) and Massey Ferguson MF 3630, field by field
Field	2096 (DT)	MF 3630	Gap
Engine
Engine power, claimed claimed	114.1 hp	131.3 hp	+15% MF 3630
Engine declared	CUMMINS B6T-590	Perkins AT 6.354.4	differs
Displacement declared	5.88 L	5.80 L	—
Maximum torque declared	400 lb·ft · 542 N·m	330 lb·ft · 447 N·m	+21% 2096 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated wet multi-disc driving clutch	—	—
Hydraulics & hitch
Pump flow declared	23.0 gpm · 87.1 L/min	—	—
Pressure declared	—	2,277–2,350 psi · 157–162 bar	—
Three-point lift at ends declared	8,250 lb · 3,742 kg	13,536 lb · 6,140 kg	+64% MF 3630
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,874 lb · 5,386 kg	11,916 lb · 5,405 kg	—
Wheelbase declared	108.0 in · 2,743 mm	109.3 in · 2,777 mm	—
Length declared	171.0 in · 4,343 mm	183.0 in · 4,649 mm	+7% MF 3630
Width declared	101.1 in · 2,567 mm	82.2 in · 2,088 mm	+23% 2096 (DT)
Height declared	118.0 in · 2,997 mm	114.4 in · 2,905 mm	—
Ground clearance declared	16.0 in · 406 mm	16.9 in · 428 mm	+5% MF 3630
Turning radius, braked declared	13.1 ft · 3.99 m	—	—
Fuel tank declared	259.9 qt · 246.0 L	274.7 qt · 260.0 L	+6% MF 3630

Source

Source