J.I. Case 2096 (DT) vs Massey Ferguson MF 6280 (A)

12 material differences

Tractor one

1984–1985

No measured PTO figure

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 2096 (DT) and the MF 6280 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

J.I. Case 2096 (DT) and Massey Ferguson MF 6280 (A), field by field
Field	2096 (DT)	MF 6280 (A)	Gap
Engine
Engine power, claimed claimed	114.1 hp	123 hp	+8% MF 6280 (A)
Engine declared	CUMMINS B6T-590	Perkins 1006.60 T	differs
Displacement declared	5.88 L	5.99 L	—
Maximum torque declared	400 lb·ft · 542 N·m	371 lb·ft · 503 N·m	+8% 2096 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% MF 6280 (A)
Clutch declared	Pedal-operated wet multi-disc driving clutch	Pedal-operated hydraulic Valeo multi-plate clutch	differs
Hydraulics & hitch
Pump flow declared	23.0 gpm · 87.1 L/min	25.3 gpm · 95.7 L/min	+10% MF 6280 (A)
Pressure declared	—	3,336 psi · 230 bar	—
Three-point lift at ends declared	8,250 lb · 3,742 kg	15,653 lb · 7,100 kg	+90% MF 6280 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	11,874 lb · 5,386 kg	10,615 lb · 4,815 kg	+12% 2096 (DT)
Maximum permissible mass declared	—	20,283 lb · 9,200 kg	—
Wheelbase declared	108.0 in · 2,743 mm	107.1 in · 2,720 mm	—
Length declared	171.0 in · 4,343 mm	173.0–202.0 in · 4,394–5,131 mm	differs
Width declared	101.1 in · 2,567 mm	108.7 in · 2,760 mm	+8% MF 6280 (A)
Height declared	118.0 in · 2,997 mm	112.9 in · 2,867 mm	—
Ground clearance declared	16.0 in · 406 mm	22.8 in · 580 mm	+43% MF 6280 (A)
Turning radius, braked declared	13.1 ft · 3.99 m	—	—
Fuel tank declared	259.9 qt · 246.0 L	169.1 qt · 160 L	+54% 2096 (DT)

Source

Source