J.I. Case 2096 (DT) vs J.I. Case 2294 (DT)

8 material differences · fewer than 12

Tractor one

1984–1985

No measured PTO figure

Tractor two

1984–1985

No measured PTO figure

Which should you choose?

Read our verdict on the 2096 (DT) and the 2294 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

J.I. Case 2096 (DT) and J.I. Case 2294 (DT), field by field
Field	2096 (DT)	2294 (DT)	Gap
Engine
Engine power, claimed claimed	114.1 hp	139.1 hp	+22% 2294 (DT)
Engine declared	CUMMINS B6T-590	CASE 504 BDT	differs
Displacement declared	5.88 L	8.26 L	+40% 2294 (DT)
Maximum torque declared	400 lb·ft · 542 N·m	470 lb·ft · 637 N·m	+18% 2294 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated wet multi-disc driving clutch	pedal-operated wet disc clutch	differs
Hydraulics & hitch
Pump flow declared	23.0 gpm · 87.1 L/min	—	—
Three-point lift at ends declared	8,250 lb · 3,742 kg	9,998 lb · 4,535 kg	+21% 2294 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,874 lb · 5,386 kg	14,390 lb · 6,527 kg	+21% 2294 (DT)
Wheelbase declared	108.0 in · 2,743 mm	104.0–110.0 in · 2,642–2,794 mm	—
Length declared	171.0 in · 4,343 mm	175.5 in · 4,458 mm	—
Width declared	101.1 in · 2,567 mm	96.0 in · 2,438 mm	+5% 2096 (DT)
Height declared	118.0 in · 2,997 mm	116.5 in · 2,960 mm	—
Ground clearance declared	16.0 in · 406 mm	19.5 in · 495 mm	+22% 2294 (DT)
Turning radius, braked declared	13.1 ft · 3.99 m	13.5 ft · 4.12 m	—
Fuel tank declared	259.9 qt · 246.0 L	259.9 qt · 246.0 L	—

Source

Source