J.I. Case 2096 (DT) or J.I. Case 2294 (DT)?
Which should you choose?
On performance, every comparable figure that differs favours the J.I. Case 2294 (DT): three-point lift. On features, the J.I. Case 2096 (DT) is ahead on drive.
- The J.I. Case 2294 (DT) suits loader and hydraulic implement work better on this data: 21% (793 kg / 1,748 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 2096 (DT) | 2294 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 86.3 kW (115.7 hp)Traktorenlexikon, “Case 2096” | 86.1 kW (115.5 hp)Traktorenlexikon, “Case 2294” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 2096 (DT) and the 2294 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 2096 (DT) and the 2294 (DT). |
| Which pumps more oil for implements? | 87.1 L/min (23.0 gpm)Traktorenlexikon, “Case 2096” | — | No figureNo call on hydraulic flow: no figure on record for the 2294 (DT). |
| Which lifts more on the three-point hitch? | 3,742 kg (8,250 lb)Traktorenlexikon, “Case 2096” | 4,535 kg (9,998 lb)Traktorenlexikon, “Case 2294” | AheadThe J.I. Case 2294 (DT) has 21% more lift (793 kg / 1,748 lb) than the J.I. Case 2096 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 5,386 kg (11,874 lb)Traktorenlexikon, “Case 2096” | 6,527 kg (14,390 lb)Traktorenlexikon, “Case 2294” | Ahead (a fact, not an advantage)The J.I. Case 2294 (DT) is 21% heavier (1,141 kg / 2,515 lb) than the J.I. Case 2096 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 2096 (DT) and the 2294 (DT). |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Case 2096” | 12Traktorenlexikon, “Case 2294” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 2096 (DT) and the 2294 (DT). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case 2096” | 30 km/h (18.6 mph)Traktorenlexikon, “Case 2294” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Case 2096” | 540/1000 rpmTraktorenlexikon, “Case 2294” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case 2096” | independentTraktorenlexikon, “Case 2294” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Case 2096” | 2WDTraktorenlexikon, “Case 2294” | AheadThe J.I. Case 2096 (DT) is available with four-wheel drive; the J.I. Case 2294 (DT) is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1984–1985 | 1984–1985 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The J.I. Case 2294 (DT) has 21% more lift (793 kg / 1,748 lb) than the J.I. Case 2096 (DT) (both lift at the hitch ends, as stated by the source).
- The J.I. Case 2294 (DT) is 21% heavier (1,141 kg / 2,515 lb) than the J.I. Case 2096 (DT) (both unladen weight, as stated by the source).
- The J.I. Case 2096 (DT) is available with four-wheel drive; the J.I. Case 2294 (DT) is two-wheel drive (as stated by the sources).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources