J.I. Case 2094 vs Massey Ferguson MF 3125 (A)

9 material differences · fewer than 12

Tractor one

1984–1985

No measured PTO figure

Tractor two

1990–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 2094 and the MF 3125 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

J.I. Case 2094 and Massey Ferguson MF 3125 (A), field by field
Field	2094	MF 3125 (A)	Gap
Engine
Engine power, claimed claimed	119 hp	124.3 hp	—
Engine declared	CASE 504 BD	Perkins 1006-6 T 7	differs
Displacement declared	8.26 L	5.99 L	+38% 2094
Maximum torque declared	367 lb·ft · 497 N·m	352 lb·ft · 477 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal operated wet disc clutch	Pedal-operated, dry and air-cooled VALEO single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	13.3 gpm · 50.3 L/min	—
Pressure declared	—	2,277–2,350 psi · 157–162 bar	—
Three-point lift at ends declared	9,998 lb · 4,535 kg	11,861 lb · 5,380 kg	+19% MF 3125 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,189 lb · 6,436 kg	10,593 lb · 4,805 kg	+34% 2094
Maximum permissible mass declared	—	18,739 lb · 8,500 kg	—
Wheelbase declared	110.0 in · 2,794 mm	106.1 in · 2,696 mm	—
Length declared	175.5 in · 4,458 mm	178.2 in · 4,527 mm	—
Width declared	96.0 in · 2,438 mm	76.5 in · 1,943 mm	+25% 2094
Height declared	116.5 in · 2,960 mm	113.0 in · 2,869 mm	—
Ground clearance declared	19.5 in · 495 mm	16.9 in · 428 mm	+16% 2094
Turning radius, braked declared	13.5 ft · 4.11 m	—	—
Fuel tank declared	259.9 qt · 246.0 L	232.5 qt · 220 L	+12% 2094

Source

Source