J.I. Case 2094 vs John Deere 7410

8 material differences · fewer than 12

Tractor one

1984–1985

No measured PTO figure

Tractor two

1997–2002

109.4 hp

Measured at the PTO · OECD Test 1750

Which should you choose?

Read our verdict on the 2094 and the 7410 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

J.I. Case 2094 and John Deere 7410, field by field
Field	2094	7410	Gap
Measured performance
PTO power, measured measured	—	109.4 hp	—
Drawbar power, measured measured	—	98.2 hp	—
Engine
Engine power, claimed claimed	119 hp	—	—
Engine declared	CASE 504 BD	John Deere 6.068 TRW-51	differs
Displacement declared	8.26 L	6.79 L	+22% 2094
Maximum torque declared	367 lb·ft · 497 N·m	361 lb·ft · 490.0 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	pedal operated wet disc clutch	Pedal-operated hydraulic wet John Deere multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	26.9 gpm · 101.8 L/min	—
Pressure declared	—	2,538 psi · 175 bar	—
Three-point lift at ends declared	9,998 lb · 4,535 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,189 lb · 6,436 kg	11,490–12,738 lb · 5,212–5,778 kg	differs
Wheelbase declared	110.0 in · 2,794 mm	103.3–111.8 in · 2,625–2,840 mm	differs
Length declared	175.5 in · 4,458 mm	174.6 in · 4,435 mm	—
Width declared	96.0 in · 2,438 mm	96.0 in · 2,438 mm	—
Height declared	116.5 in · 2,960 mm	113.4 in · 2,880 mm	—
Ground clearance declared	19.5 in · 495 mm	14.2–15.7 in · 360–400 mm	differs
Turning radius, braked declared	13.5 ft · 4.11 m	—	—
Fuel tank declared	259.9 qt · 246.0 L	199.7 qt · 189.0 L	+30% 2094

Source

Source