J.I. Case 1896 (DT) vs VALMET 905-4

12 material differences

Tractor one

1984–1985

No measured PTO figure

Tractor two

1984–1989

No measured PTO figure

Which should you choose?

Read our verdict on the 1896 (DT) and the 905-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

J.I. Case 1896 (DT) and VALMET 905-4, field by field
Field	1896 (DT)	905-4	Gap
Engine
Engine power, claimed claimed	93.7 hp	103.5 hp	+10% 905-4
Engine declared	CUMMINS B6T-590	VALMET D 66 DS 9	differs
Displacement declared	5.88 L	6.60 L	+12% 905-4
Maximum torque declared	364 lb·ft · 493 N·m	291 lb·ft · 395 N·m	+25% 1896 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Pedal-operated dry LuK single-plate clutch	—
Hydraulics & hitch
Pump flow declared	—	12.5 gpm · 47.5 L/min	—
Pressure declared	—	3,191 psi · 220 bar	—
Three-point lift at ends declared	6,598 lb · 2,993 kg	9,237 lb · 4,190 kg	+40% 905-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,850 lb · 5,375 kg	9,105 lb · 4,130 kg	+30% 1896 (DT)
Wheelbase declared	108.0 in · 2,743 mm	100.8 in · 2,560 mm	+7% 1896 (DT)
Length declared	171.0 in · 4,343 mm	200.8 in · 5,100 mm	+17% 905-4
Width declared	101.1 in · 2,567 mm	84.3 in · 2,140 mm	+20% 1896 (DT)
Height declared	118.0 in · 2,997 mm	106.5 in · 2,705 mm	+11% 1896 (DT)
Ground clearance declared	16.0 in · 406 mm	18.7 in · 475 mm	+17% 905-4
Turning radius, braked declared	13.1 ft · 3.99 m	17.2 ft · 5.25 m	+32% 905-4
Fuel tank declared	259.9 qt · 246.0 L	190.2 qt · 180.0 L	+37% 1896 (DT)

Source

Source