J.I. Case 1896 (DT) vs VALMET 6600-4 (6600E)

12 material differences

Tractor one

1984–1985

No measured PTO figure

Tractor two

1991–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 1896 (DT) and the 6600-4 (6600E) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

J.I. Case 1896 (DT) and VALMET 6600-4 (6600E), field by field
Field	1896 (DT)	6600-4 (6600E)	Gap
Engine
Engine power, claimed claimed	93.7 hp	103.5 hp	+10% 6600-4 (6600E)
Engine declared	CUMMINS B6T-590	VALMET 420 DS (420 DSE)	differs
Displacement declared	5.88 L	4.40 L	+34% 1896 (DT)
Maximum torque declared	364 lb·ft · 493 N·m	299 lb·ft · 405 N·m	+22% 1896 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	—	Pedal operated dry Fichtel & Sachs single plate clutch	—
Hydraulics & hitch
Pump flow declared	—	21.2 gpm · 80.3 L/min	—
Pressure declared	—	2,031–2,248 psi · 140–155 bar	—
Three-point lift at ends declared	6,598 lb · 2,993 kg	12,930 lb · 5,865 kg	+96% 6600-4 (6600E)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,850 lb · 5,375 kg	9,700 lb · 4,400 kg	+22% 1896 (DT)
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	108.0 in · 2,743 mm	91.6 in · 2,326 mm	+18% 1896 (DT)
Length declared	171.0 in · 4,343 mm	177.7 in · 4,514 mm	—
Width declared	101.1 in · 2,567 mm	78.1 in · 1,985 mm	+29% 1896 (DT)
Height declared	118.0 in · 2,997 mm	108.3 in · 2,750 mm	+9% 1896 (DT)
Ground clearance declared	16.0 in · 406 mm	19.1 in · 485 mm	+19% 6600-4 (6600E)
Turning radius, braked declared	13.1 ft · 3.99 m	15.3 ft · 4.65 m	+17% 6600-4 (6600E)
Fuel tank declared	259.9 qt · 246.0 L	174.4 qt · 165.0 L	+49% 1896 (DT)

Source

Source