6 material differences · fewer than 12
Tractor oneJ.I. Case 16941984–1985No measured PTO figureTractor twoJohn Deere 32551991–1993No measured PTO figure
Which should you choose?
Read our verdict on the 1694 and the 3255 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 1694 | 3255 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 110.5 hp | 109.6 hp | — |
| Engine declared | DAVID BROWN AD 6/55 Turbo | John Deere 6.359 TL-007 | differs |
| Displacement declared | 5.39 L | 5.88 L | +9% 3255 |
| Maximum torque declared | 292 lb·ft · 396 N·m | 305 lb·ft · 413 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry double clutch | Pedal-operated dry LuK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | — | 24.8 gpm · 93.9 L/min | — |
| Pressure declared | — | 2,321 psi · 160 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,590 lb · 4,350 kg | 11,729 lb · 5,320 kg | +22% 3255 |
| Wheelbase declared | 100.0 in · 2,540 mm | 101.7 in · 2,582 mm | — |
| Length declared | 167.3 in · 4,250 mm | 172.0 in · 4,370 mm | — |
| Width declared | 79.0 in · 2,007 mm | 90.2 in · 2,290 mm | +14% 3255 |
| Ground clearance declared | 16.5 in · 419 mm | 16.5 in · 420 mm | — |
| Turning radius, braked declared | 14.5 ft · 4.43 m | 14.5 ft · 4.41 m | — |
| Fuel tank declared | 143.7 qt · 136.0 L | 182.8 qt · 173.0 L | +27% 3255 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
J.I. Case 1694 sources
Source
- Source: Traktorenlexikon, “Case 1694”
John Deere 3255 sources
Source
- Source: Traktorenlexikon, “John Deere 3255”
- Source: Traktorenlexikon, “John Deere 3650”