International Harvester International 424 vs SOMECA 450-N (DT)

9 material differences · fewer than 12

Tractor one

1964–1967

No measured PTO figure

Tractor two

1970–1977

No measured PTO figure

Which should you choose?

Read our verdict on the International 424 and the 450-N (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

International Harvester International 424 and SOMECA 450-N (DT), field by field
Field	International 424	450-N (DT)	Gap
Engine
Engine power, claimed claimed	36.5 hp	42.4 hp	+16% 450-N (DT)
Engine declared	INTERNATIONAL HARVESTER C-146	FIAT-IVECO 8035.01.300	differs
Displacement declared	—	2.34 L	—
Maximum torque declared	113 lb·ft · 153 N·m	103 lb·ft · 140 N·m	+9% International 424
Transmission
Top speed declared	15.5 mph · 25 km/h	16.8 mph · 27 km/h	+8% 450-N (DT)
Clutch declared	—	Pedal-operated two-stage dry FERODO double clutch	—
Hydraulics & hitch
Pump flow declared	6.0 gpm · 22.7 L/min	5.8 gpm · 21.8 L/min	—
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift at ends declared	—	2,866 lb · 1,300 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,054 lb · 1,839 kg	3,748 lb · 1,700 kg	+8% International 424
Wheelbase declared	70.0 in · 1,778 mm	75.6 in · 1,920 mm	+8% 450-N (DT)
Length declared	121.0 in · 3,073 mm	126.0 in · 3,200 mm	—
Width declared	67.2 in · 1,708 mm	62.4 in · 1,585 mm	+8% International 424
Height declared	57.0 in · 1,448 mm	67.5 in · 1,715 mm	+18% 450-N (DT)
Ground clearance declared	18.0 in · 457 mm	14.6 in · 370 mm	+24% International 424
Turning radius, braked declared	8.2 ft · 2.49 m	9.7 ft · 2.95 m	+18% 450-N (DT)
Fuel tank declared	56.0 qt · 53.0 L	57.1 qt · 54.0 L	—

Source

Source