8 material differences · fewer than 12
Tractor oneInternational Harvester International 4241964–1967No measured PTO figureTractor twoLeyland 2451973–1975No measured PTO figure
Which should you choose?
Read our verdict on the International 424 and the 245 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | International 424 | 245 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 36.5 hp | 46.8 hp | +28% 245 |
| Engine declared | INTERNATIONAL HARVESTER C-146 | Perkins D 3152 | differs |
| Displacement declared | — | 2.50 L | — |
| Maximum torque declared | 113 lb·ft · 153 N·m | 128 lb·ft · 173 N·m | +13% 245 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 16.2 mph · 26 km/h | — |
| Clutch declared | — | Dry Borg & Beck double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.0 gpm · 22.7 L/min | 8.0 gpm · 30.2 L/min | +33% 245 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,054 lb · 1,839 kg | 5,236 lb · 2,375 kg | +29% 245 |
| Wheelbase declared | 70.0 in · 1,778 mm | 74.4 in · 1,890 mm | +6% 245 |
| Length declared | 121.0 in · 3,073 mm | 126.0 in · 3,200 mm | — |
| Width declared | 67.2 in · 1,708 mm | 63.8 in · 1,621 mm | +5% International 424 |
| Ground clearance declared | 18.0 in · 457 mm | 15.7 in · 399 mm | +15% International 424 |
| Turning radius, braked declared | 8.2 ft · 2.49 m | 10.1 ft · 3.07 m | +23% 245 |
| Fuel tank declared | 56.0 qt · 53.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester International 424 sources
- Source: Traktorenlexikon, “IHC 424”
Leyland 245 sources
- Source: Traktorenlexikon, “Leyland 245”
- Source: Traktorenlexikon, “Lindner BF 420 SN/SA”