International Harvester 786 vs Landini 9800 (DT)

9 material differences · fewer than 12

Tractor one

1980–1981

No measured PTO figure

Tractor two

1987–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 786 and the 9800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester 786 and Landini 9800 (DT), field by field
Field	786	9800 (DT)	Gap
Engine
Engine power, claimed claimed	79.9 hp	88.8 hp	+11% 9800 (DT)
Engine declared	INTERNATIONAL HARVESTER D-358	PERKINS LJ 4.236	differs
Displacement declared	5.87 L	3.86 L	+52% 786
Maximum torque declared	251 lb·ft · 340 N·m	242 lb·ft · 328 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal operated DYNA-LIFE clutch	Pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Pump flow declared	12.0 gpm · 45.5 L/min	13.5 gpm · 51.1 L/min	+12% 9800 (DT)
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	10,296 lb · 4,670 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,590 lb · 5,257 kg	8,995 lb · 4,080 kg	+29% 786
Maximum permissible mass declared	—	14,991 lb · 6,800 kg	—
Wheelbase declared	104.8 in · 2,662 mm	96.9 in · 2,460 mm	+8% 786
Length declared	165.0 in · 4,191 mm	166.1 in · 4,220 mm	—
Width declared	102.0 in · 2,591 mm	81.9 in · 2,080 mm	+25% 786
Height declared	112.0 in · 2,845 mm	108.7 in · 2,760 mm	—
Ground clearance declared	13.0 in · 330 mm	16.0 in · 407 mm	+23% 9800 (DT)
Turning radius, braked declared	11.9 ft · 3.63 m	—	—
Fuel tank declared	199.7 qt · 189.0 L	182.8 qt · 173.0 L	+9% 786

Source

Source