International Harvester 464 or SAME Minitauro 50?

Which should you choose?

On performance, every comparable figure that differs favours the International Harvester 464: hydraulic flow. It is also ahead on top speed and PTO speeds. On features, the SAME Minitauro 50 is ahead on drive.

  • The International Harvester 464 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 1000 rpm.
  • The International Harvester 464 suits loader and hydraulic implement work better on this data: 182% (29.3 L/min / 7.7 gpm) more hydraulic flow.
  • The International Harvester 464 suits road haulage better on this data: 44% (11.0 km/h / 6.8 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for International Harvester 464 and SAME Minitauro 50, with the call on each
Question464Minitauro 50Call
Which puts more power through the PTO shaft?31.1 kW (41.7 hp)Traktorenlexikon, “IHC 464”31.3 kW (41.9 hp)Traktorenlexikon, “SAME Minitauro 50”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 464 and the Minitauro 50.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 464 and the Minitauro 50.
Which pumps more oil for implements?45.4 L/min (12.0 gpm)Traktorenlexikon, “IHC 464”16.1 L/min (4.3 gpm)Traktorenlexikon, “SAME Minitauro 50”AheadThe International Harvester 464 has 182% more hydraulic flow (29.3 L/min / 7.7 gpm) than the SAME Minitauro 50 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,500 kg (3,307 lb)Traktorenlexikon, “IHC 464”No figureNo call on three-point lift: no figure on record for the Minitauro 50.
Which is heavier, for traction?2,327 kg (5,130 lb)Traktorenlexikon, “IHC 464”1,750 kg (3,858 lb)Traktorenlexikon, “SAME Minitauro 50”Ahead (a fact, not an advantage)The International Harvester 464 is 33% heavier (577 kg / 1,272 lb) than the SAME Minitauro 50 (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the 464 and the Minitauro 50.
Which has the wider choice of gears?8Traktorenlexikon, “IHC 464”8Traktorenlexikon, “SAME Minitauro 50”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 464 and the Minitauro 50.
Which is faster on the road?36 km/h (22.4 mph)Traktorenlexikon, “IHC 464”25 km/h (15.5 mph)Traktorenlexikon, “SAME Minitauro 50”AheadThe International Harvester 464 has 44% more top speed (11.0 km/h / 6.8 mph) than the SAME Minitauro 50 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “IHC 464”540 rpmTraktorenlexikon, “SAME Minitauro 50”AheadThe International Harvester 464 offers 1000 rpm at the PTO, which the SAME Minitauro 50 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “IHC 464”No figureNo call on PTO independence: not stated for the Minitauro 50.
Which drives on both axles?2WDTraktorenlexikon, “IHC 464”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Minitauro 50”AheadThe SAME Minitauro 50 is available with four-wheel drive; the International Harvester 464 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1973–19781967–1972Ahead (a fact, not an advantage)The International Harvester 464 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The International Harvester 464 has 182% more hydraulic flow (29.3 L/min / 7.7 gpm) than the SAME Minitauro 50 (both pump flow, as stated by the source).
  • The International Harvester 464 is 33% heavier (577 kg / 1,272 lb) than the SAME Minitauro 50 (both unladen weight, as stated by the source).
  • The International Harvester 464 has 44% more top speed (11.0 km/h / 6.8 mph) than the SAME Minitauro 50 (both top speed forward, as stated by the source).
  • The International Harvester 464 offers 1000 rpm at the PTO, which the SAME Minitauro 50 does not (as stated by the sources).
  • The SAME Minitauro 50 is available with four-wheel drive; the International Harvester 464 is two-wheel drive (as stated by the sources).
  • The International Harvester 464 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources