International Harvester 3088 vs VALMET 755/755-4
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 3088 and the 755/755-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 3088 | 755/755-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80.9 hp | 88.8 hp | +10% 755/755-4 |
| Engine declared | INTERNATIONAL HARVESTER D-358 | VALMET TD 44 D-7 | differs |
| Displacement declared | 5.87 L | 4.40 L | +34% 3088 |
| Maximum torque declared | — | 240 lb·ft · 325 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Foot-operated dry single-disc clutch combined with wet turbo clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 15.0 gpm · 56.8 L/min | — | — |
| Pressure declared | — | 3,191 psi · 220 bar | — |
| Three-point lift at ends declared | 6,704 lb · 3,041 kg | 9,921 lb · 4,500 kg | +48% 755/755-4 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,940 lb · 5,416 kg | 8,289 lb · 3,760 kg | +44% 3088 |
| Wheelbase declared | 104.8 in · 2,662 mm | 93.9 in · 2,385 mm | +12% 3088 |
| Length declared | 184.0 in · 4,674 mm | 177.8 in · 4,515 mm | — |
| Width declared | 102.0 in · 2,591 mm | 83.9 in · 2,130 mm | +22% 3088 |
| Height declared | 112.0 in · 2,845 mm | 105.1 in · 2,670 mm | +7% 3088 |
| Ground clearance declared | 13.0 in · 330 mm | 18.7 in · 475 mm | +44% 755/755-4 |
| Turning radius, braked declared | 11.9 ft · 3.63 m | — | — |
| Fuel tank declared | 200.0 qt · 189.3 L | 190.2 qt · 180.0 L | — |
International Harvester 3088 sources
Source
- Source: Traktorenlexikon, “IHC 3088”
- Source: Traktorenlexikon, “IHC 786”
VALMET 755/755-4 sources
Source
- Source: Traktorenlexikon, “Valmet 755”