6 material differences · fewer than 12

Tractor oneInternational Harvester 12061965–1967No measured PTO figureTractor twoOLIVER 20551969–1971No measured PTO figure

Which should you choose?

Read our verdict on the 1206 and the 2055 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 4 fields identical or within 5%, which is not counted as material

International Harvester 1206 and OLIVER 2055, field by field
Field12062055Gap
Engine
Engine power, claimed claimed112.4 hp110.5 hp—
Engine declaredINTERNATIONAL HARVESTER DT-361——
Displacement declared5.91 L——
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Hydraulics & hitch
Hydraulic centre declared—Closed centre—
Pump flow declared12.0 gpm · 45.5 L/min20.0 gpm · 75.7 L/min+66% 2055
Rear PTO speeds declared1000 rpm1000 rpm—
Weight & dimensions
Unladen weight declared10,115 lb · 4,588 kg10,675 lb · 4,842 kg+6% 2055
Wheelbase declared91.0 in · 2,311 mm103.3 in · 2,623 mm+14% 2055
Length declared153.0 in · 3,886 mm168.5 in · 4,280 mm+10% 2055
Width declared94.0 in · 2,388 mm95.0 in · 2,413 mm—
Ground clearance declared23.5 in · 597 mm19.0 in · 483 mm+24% 1206
Turning radius, braked declared—10.8 ft · 3.28 m—
Fuel tank declared140.0 qt · 132.5 L159.6 qt · 151.0 L+14% 2055

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

International Harvester 1206 sources

Source
  • Source: Traktorenlexikon, “IHC 1206”

OLIVER 2055 sources

Source
  • Source: Traktorenlexikon, “Oliver 2055”