6 material differences · fewer than 12
Tractor oneInternational Harvester 1055 XL1981–1982No measured PTO figureTractor twoLandini 10.000 (DT)1978–1993No measured PTO figure
Which should you choose?
Read our verdict on the 1055 XL and the 10.000 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 1055 XL | 10.000 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.6 hp | — |
| Engine declared | IH D-358 | Perkins TW 31087 U (A. 6.354.4/A. 6.354.4 HTR) | differs |
| Displacement declared | 5.87 L | 5.79 L | — |
| Maximum torque declared | 279 lb·ft · 378 N·m | 289 lb·ft · 392 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal-operated, dry and air-cooled double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.5 gpm · 36.0 L/min | 12.3 gpm · 46.5 L/min | +29% 10.000 (DT) |
| Pressure declared | 2,466 psi · 170 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,634 lb · 4,370 kg | 9,976 lb · 4,525 kg | — |
| Wheelbase declared | 103.5 in · 2,630 mm | 104.7 in · 2,660 mm | — |
| Length declared | 165.1 in · 4,194 mm | 171.3 in · 4,350 mm | — |
| Width declared | 90.8 in · 2,306 mm | 83.9 in · 2,130 mm | +8% 1055 XL |
| Ground clearance declared | 20.2 in · 512 mm | 16.9 in · 430 mm | +19% 1055 XL |
| Turning radius, braked declared | 14.4 ft · 4.40 m | — | — |
| Fuel tank declared | 147.9 qt · 140 L | 179.6 qt · 170.0 L | +21% 10.000 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 1055 XL sources
- Source: Traktorenlexikon, “IHC 1055 XL”
Landini 10.000 (DT) sources
- Source: Traktorenlexikon, “Landini 10000”