International Harvester 1055 vs VALMET 1102 (-4)
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 1055 and the 1102 (-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 1055 | 1102 (-4) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 99 hp | 100.6 hp | — |
| Engine declared | IH D-358 | VALMET 411 BS or 411 CS | differs |
| Displacement declared | 5.87 L | — | — |
| Maximum torque declared | 281 lb·ft · 381 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry double clutch by Fichtel & Sachs | dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.5 gpm · 39.9 L/min | 9.2 gpm · 35.0 L/min | +14% 1055 |
| Pressure declared | 2,466 psi · 170 bar | — | — |
| Three-point lift at ends declared | 9,535 lb · 4,325 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,458 lb · 4,290 kg | 8,598 lb · 3,900 kg | +10% 1055 |
| Wheelbase declared | 103.4 in · 2,626 mm | 91.3 in · 2,320 mm | +13% 1055 |
| Length declared | 165.1 in · 4,194 mm | 154.7 in · 3,930 mm | +7% 1055 |
| Width declared | 80.7 in · 2,049 mm | 78.0 in · 1,980 mm | — |
| Height declared | 104.3 in · 2,649 mm | 106.7 in · 2,710 mm | — |
| Ground clearance declared | 20.3 in · 516 mm | 20.5 in · 520 mm | — |
| Turning radius, braked declared | 14.4 ft · 4.40 m | 12.1 ft · 3.70 m | +19% 1055 |
| Fuel tank declared | 147.9 qt · 140 L | 102.5 qt · 97.0 L | +44% 1055 |
International Harvester 1055 sources
Source
- Source: Traktorenlexikon, “IHC 1055”
- Source: Traktorenlexikon, “IHC 1055 XL”
VALMET 1102 (-4) sources
Source
- Source: Traktorenlexikon, “Valmet 1102”