International Harvester D-430 Standard or Renault D 30?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the D-430 Standard has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Renault D 30 suits road haulage better on this data: 25% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | D-430 Standard | D 30 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 22.1 kW (29.6 hp)Traktorenlexikon, “McCormick D-430 Standard” | 22.1 kW (29.6 hp)Traktorenlexikon, “Renault D30 R7051” | Not comparableNot comparable on power at the PTO shaft: the D-430 Standard has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the D-430 Standard and the D 30. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the D-430 Standard and the D 30. |
| Which pumps more oil for implements? | 15.5 L/min (4.1 gpm)Traktorenlexikon, “McCormick D-430 Standard” | 12.0 L/min (3.2 gpm)Traktorenlexikon, “Renault D30 R7051” | AheadThe International Harvester D-430 Standard has 29% more hydraulic flow (3.5 L/min / 0.9 gpm) than the Renault D 30 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 600 kg (1,323 lb)Traktorenlexikon, “McCormick D-430 Standard” | 1,300 kg (2,866 lb)Traktorenlexikon, “Renault D30 R7051” | AheadThe Renault D 30 has 117% more lift (700 kg / 1,543 lb) than the International Harvester D-430 Standard (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 1,543 kg (3,402 lb)Traktorenlexikon, “McCormick D-430 Standard” | 1,485 kg (3,274 lb)Traktorenlexikon, “Renault D30 R7051” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 2,000 kg (4,409 lb)Traktorenlexikon, “McCormick D-430 Standard” | — | No figureNo call on maximum permissible mass: no figure on record for the D 30. |
| Which has the wider choice of gears? | 8Traktorenlexikon, “McCormick D-430 Standard” | 6 to 12Traktorenlexikon, “Renault D30 R7051” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the D-430 Standard and the D 30. |
| Which is faster on the road? | 20 km/h (12.4 mph)Traktorenlexikon, “McCormick D-430 Standard” | 25 km/h (15.5 mph)Traktorenlexikon, “Renault D30 R7051” | AheadThe Renault D 30 has 25% more top speed (5.0 km/h / 3.1 mph) than the International Harvester D-430 Standard (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “McCormick D-430 Standard” | 540 rpmTraktorenlexikon, “Renault D30 R7051” | EvenEven on PTO speeds: the same speeds (540 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “McCormick D-430 Standard” | — | No figureNo call on PTO independence: not stated for the D 30. |
| Which drives on both axles? | 2WDTraktorenlexikon, “McCormick D-430 Standard” | 2WDTraktorenlexikon, “Renault D30 R7051” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1958–1962 | 1956–1960 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The International Harvester D-430 Standard has 29% more hydraulic flow (3.5 L/min / 0.9 gpm) than the Renault D 30 (both pump flow, as stated by the source).
- The Renault D 30 has 117% more lift (700 kg / 1,543 lb) than the International Harvester D-430 Standard (both lift at the hitch ends, as stated by the source).
- The Renault D 30 has 25% more top speed (5.0 km/h / 3.1 mph) than the International Harvester D-430 Standard (both top speed forward, as stated by the source).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540 rpm).
- Even on drive: all two-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the D-430 Standard has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 30 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources