International Harvester D-324 Standard vs SOMECA 250 (DT)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the D-324 Standard and the 250 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | D-324 Standard | 250 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 23.7 hp | 24.7 hp | — |
| Engine declared | INTERNATIONAL-HARVESTER DD-111 | FIAT-TRATTORI 852 A | differs |
| Displacement declared | 1.83 L | 1.56 L | +17% D-324 Standard |
| Maximum torque declared | 73 lb·ft · 99 N·m | 58 lb·ft · 79 N·m | +25% D-324 Standard |
| Transmission | |||
| Top speed declared | 11.8 mph · 19 km/h | 15.5 mph · 25 km/h | +32% 250 (DT) |
| Clutch declared | Pedal operated dry single plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 2.5 gpm · 9.3 L/min | — |
| Three-point lift at ends declared | 1,323 lb · 600 kg | 1,323 lb · 600 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,386 lb · 1,536 kg | 2,359 lb · 1,070 kg | +44% D-324 Standard |
| Wheelbase declared | 70.0 in · 1,779 mm | 66.9 in · 1,700 mm | — |
| Length declared | 108.3 in · 2,750 mm | 115.4 in · 2,930 mm | +7% 250 (DT) |
| Width declared | 64.6 in · 1,640 mm | 57.7 in · 1,465 mm | +12% D-324 Standard |
| Height declared | 61.0 in · 1,550 mm | 61.8 in · 1,570 mm | — |
| Ground clearance declared | 15.1 in · 383 mm | 18.5 in · 470 mm | +23% 250 (DT) |
| Turning radius, braked declared | 9.2 ft · 2.80 m | 9.2 ft · 2.80 m | — |
| Fuel tank declared | 31.7 qt · 30.0 L | 30.6 qt · 29.0 L | — |
International Harvester D-324 Standard sources
Source
- Source: Traktorenlexikon, “McCormick D-324 Standard”
- Source: Traktorenlexikon, “McCormick D-324 Farmall”
SOMECA 250 (DT) sources
Source
- Source: Traktorenlexikon, “Someca 250”